• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Railway General Knowledge.

Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

martinsh

Established Member
Joined
27 Jan 2011
Messages
1,765
Location
Considering a move to Memphis
West Ruislip - Epping 34 miles.

That's correct - my source says 34.1 miles.
--- old post above --- --- new post below ---
I don't have the mileage to hand, but what about Cockfosters to Cockfosters via the Heathrow loop?

I forgot to add "without travelling through the same station more than once" !!
 

theageofthetra

Established Member
Joined
27 May 2012
Messages
3,565
Location
Beckenham
A series of steam locomotives were built that had driving wheels with a tread of nearly a foot in width. Why was this & where was the railway?
 
Last edited:

Ash Bridge

Established Member
Joined
17 Mar 2014
Messages
4,214
Location
Stockport
Were these locomotives Russian built 2-10-0s, in operation in the US on the Western Maryland RR, originally built to Russian 5ft. gauge but with the tyres modified to operate on standard gauge track?
 

Marton

Member
Joined
9 Nov 2008
Messages
665
Russian designed but US built class Ye. 200 stranded in US after the revolution.

Erie RR, Seaboard Air Line RR and St Louis San Francisco RR were principle users.
 

Marton

Member
Joined
9 Nov 2008
Messages
665
460T Hudson 2'6" gauge

Used in the WWI western front light rail system.

Helped with re-railing.
 
Last edited:

oddiesjack

Member
Joined
11 Jan 2012
Messages
315
Location
High Peak

Marton

Member
Joined
9 Nov 2008
Messages
665
I am having trouble imagining how bad the track must have been for a loco with tyres a foot wide to derail in the first place!


These went very close to the front and the effects of the shelling would derail most things.

They were also flangless.
 

theageofthetra

Established Member
Joined
27 May 2012
Messages
3,565
Location
Beckenham
Not pneumatic but flangless
--- old post above --- --- new post below ---
Ok to bump this on a bit- this railway was French, suburban & passenger carrying.
 

theageofthetra

Established Member
Joined
27 May 2012
Messages
3,565
Location
Beckenham
Thats the one. The line was built with very sharp curves- including balloon loops of 25m radius at each terminus to negate the need to run round the loco. The locos had two cylinders driving each side of driving wheels separately as there was no common axle- dragging losses would be too great. The carriages also had pivoted single axles and were connected to each other rather like most model trains are. It seemed quite succesful & am surprised the system didn't find use on lightly built French colonial railways or in military/factory applications.

More details here-
http://www.douglas-self.com/MUSEUM/LOCOLOCO/arnoux/arnoux.htm
 

Darren R

Established Member
Joined
26 Jan 2013
Messages
1,252
Location
Lancashire
That would appear to be an interior of one of the half-timbered Tavern Cars designed, I think, by Mr Bulleid.
--- old post above --- --- new post below ---
Some further info: In 1947 some Maunsell restaurant cars were modified to provide a buffet area for drinks and snacks. These inspired Bulleid to design Tavern Cars in 1949, complete with imitation brickwork and wooden beams externally at one end of the carriage. The other end contained a restaurant section with seats back to the carriage sides facing inwards and only had ventilator windows at the top of the sides. This was to make passengers concentrate on eating rather than watching the view, thus speeding up service and throughput. It meant, however, that passengers couldn't see where they were. Consequently they weren't popular and soon modified. The cars were given pub-style names.


Open floor, btw!
 

johnnychips

Established Member
Joined
19 Nov 2011
Messages
3,824
Location
Leeds
As a a wild guess, Street, a town in Somerset, that is also on station names like Argyle Street?
 

Ash Bridge

Established Member
Joined
17 Mar 2014
Messages
4,214
Location
Stockport
4 Crampton type locomotives with chimneys rising about 8ft above the top of the boiler,were built in 1853 for service in a region of South West Germany.
In France, the Bayonne-Anglet-Biarritz line used double-deck coaches, requiring a loco with an 8ft chimney to lift the smoke clear of the upper decks.
 

Top