• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

What is this?

Status
Not open for further replies.
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

yoyothehobo

Member
Joined
21 Aug 2015
Messages
849
I dont know what the yellow things are, but at least there is a datum plate in the photo for forum consistency...
 

zwk500

Veteran Member
Joined
20 Jan 2020
Messages
18,428
Location
Northampton
Axle counters?
Pat
They don't appear to be connected to a trackside cabinet though, and they're underneath the head of the rail so would they be able to register the changing field?

I note that track is very rusty, even if it looks to be in good condition otherwise. Are they perhaps clearance point markers for a shunt neck or yard entrance? The angle of the photo is not clear but the tracks appear to be converging.
 

swt_passenger

Veteran Member
Joined
7 Apr 2010
Messages
34,239
They don't appear to be connected to a trackside cabinet though, and they're underneath the head of the rail so would they be able to register the changing field?

I note that track is very rusty, even if it looks to be in good condition otherwise. Are they perhaps clearance point markers for a shunt neck or yard entrance? The angle of the photo is not clear but the tracks appear to be converging.
I also wondered about the lack of any obvious cabling. They do look a bit like the yellow Frauscher axle counter detector heads at first glance, but they‘d always come with pretty obvious wiring and securing brackets.
 

SargeNpton

Established Member
Joined
19 Nov 2018
Messages
1,708
New rails, sleepers and fixings. Wonder if they are used in conjunction with a tamper or consolidator?
 

najaB

Veteran Member
Joined
28 Aug 2011
Messages
33,592
Location
Scotland
I dont know what the yellow things are, but at least there is a datum plate in the photo for forum consistency...
I was ready to type "datum plate" before the photo even loaded. :)

Is it perspective, or is there something 'odd' about the sleepers? They don't seem to line up properly either side of the rails.
 

SargeNpton

Established Member
Joined
19 Nov 2018
Messages
1,708
I was ready to type "datum plate" before the photo even loaded. :)

Is it perspective, or is there something 'odd' about the sleepers? They don't seem to line up properly either side of the rails.
I think it; because some of the sleeper ends are covered by the fresh ballast.
 

Spartacus

Established Member
Joined
25 Aug 2009
Messages
3,806
I'm wondering if it's some sort of wireless early warning device for someone working down the line, which would avoid the complications that placing dets could have? No doubt someone will know, but they're new to me.
 

AndrewE

Established Member
Joined
9 Nov 2015
Messages
7,310
I also wondered about the lack of any obvious cabling. They do look a bit like the yellow Frauscher axle counter detector heads at first glance, but they‘d always come with pretty obvious wiring and securing brackets.
Maybe installed now, but to be connectd up in a few weeks' time? (whatever they are!)
 

carlos118

Member
Joined
12 May 2016
Messages
7
They are not axle counters but are installed about 5-10 meters away from some...they are also covered in this black grease it looks like but the axle counter does not have any on it. This was on the crossrail line if it helps.
 

carlos118

Member
Joined
12 May 2016
Messages
7
Which axle counters are these? They look similar to the wireless axle counters but not the same from what i have seen before
 

Hellzapoppin

Member
Joined
16 Jan 2016
Messages
266
There's a YouTube vid showing how they work. The channel is RSS Infrastructure.
Think it's Critical Rail Thermometer monitor 300??
 
Status
Not open for further replies.

Top