The suspension on Electrostars is always a bit lively, particularly at the back of the train. Try a brand new 387/2 going through Cricklewood on the down fast.
yeh, they sway, unlike more other stock. Can be quite uncomfortable above a motor bogie.
The suspension on Electrostars is always a bit lively, particularly at the back of the train. Try a brand new 387/2 going through Cricklewood on the down fast.
I assume the 387s have a different bogie design to the 378s and 172s? The latter two I've always found excellent for ride quality, so I assume the 387 design is not as good. Yet to get a 387, but sure it beats a Pacer by a mile![]()
387s and 378s have the same kind of bogie design (as also used in all Bombardier UK products apart from the 220/221/222 classes, and 172) which IIRC is derived from the BREL bogie design. The 172s (along with the 220/222 classes and the new 345/710 classes) use an inboard framed bogie.
At this point, I half expect Phillip Phlopp to appear and inform us that the bogie used on the 387 has a different wall thickness in the section forming the outside frame compared to the 377s, which makes it a completely different bogie
interesting that the 387s retain the older style bogie in that case.
I find the down fasts between Henson and the Elstree Tunnel the worst. It's like the train is being thrown around by a Mexican wrestler.The suspension on Electrostars is always a bit lively, particularly at the back of the train. Try a brand new 387/2 going through Cricklewood on the down fast.
Very true - as you say, no surprise there was no real change considering what was intended to be a short term build. Not worth the cost or hassle of implementing the new bogie design into what is essentially a 12/13 year old design. As it turns out, the 387 programme has gone far further than was originally expected.
It's a lot older than 12/13 years. First Electrostars were in service in built in 1999 and that's without looking at the fact thy were initially designed under BR (the original full sized model BR built has 442 like drivers windows).
387s and 378s have the same kind of bogie design (as also used in all Bombardier UK products apart from the 220/221/222 classes, and 172) which IIRC is derived from the BREL bogie design. The 172s (along with the 220/222 classes and the new 345/710 classes) use an inboard framed bogie.
At this point, I half expect Phillip Phlopp to appear and inform us that the bogie used on the 387 has a different wall thickness in the section forming the outside frame compared to the 377s, which makes it a completely different bogie
2 X 700 sets just passed gatwick heading down. Inside 5 minutes.
Think you guys might like this info, Thursday & Friday this week only. Different workings next week.
1W26 11.05 Brighton to Bedford
2W43 13.54 Bedford to Three Bridges

Would next week be full diagrams?Think you guys might like this info, Thursday & Friday this week only. Different workings next week.
1W26 11.05 Brighton to Bedford
2W43 13.54 Bedford to Three Bridges
Would next week be full diagrams?
Thanks, but what is it working today, anybody know?![]()
No diagrams next week. Just a single diagram that works most of the day to/from London Bridge. No Core trips.
Check back on a few pages as it's already been stated.
Mods and Class377/5 - is it worth creating a temporary sticky / note in the frequently requested diagrams thread with this, just to save people asking everyday?
Not really as they are going to change a lot. There's two different diagrams this week, next week is different again and following week changes again.
I find the down fasts between Henson and the Elstree Tunnel the worst. It's like the train is being thrown around by a Mexican wrestler.
I believe it was you that told me it was due to problems with the underlying track structure in the area, but the Electrostars don't absorb it anywhere near as well as the 319s.
It was indeed me, and that is indeed a problem. However having sat in row ZZ of a 12 x 387 tonight, I barely noticed the section in question, whereas everyone noticed Cricklewood!
Besides, a 319 on a down evening peak service will be lucky to get to 85mph by Mill Hill, whereas a 3x7 will be at or near 100mph at Cricklewood.
Hope one of the diagrams includes 12 42 LBG - BTN, today left LBG F & S, 4 coaches only, still F & S leaving ECR, incoming service looked a bit crowded too. Certainly looks a case for 8 cars. Anyone say what unit came in from Dollands Moor this am.
--- old post above --- --- new post below ---
Hope one of the diagrams includes 12 42 LBG - BTN, today left LBG F & S, 4 coaches only, still F & S leaving ECR, incoming service looked a bit crowded too. Certainly looks a case for 8 cars. Anyone say what unit came in from Dollands Moor this am.
It was indeed me, and that is indeed a problem. However having sat in row ZZ of a 12 x 387 tonight, I barely noticed the section in question, whereas everyone noticed Cricklewood!
Besides, a 319 on a down evening peak service will be lucky to get to 85mph by Mill Hill, whereas a 3x7 will be at or near 100mph at Cricklewood.
A 3x7 can coast from the M25 bridge - and still be on time at SAC (as one driver will occassionally tell you on the PA) - this to do , with 3xx running in 319 SRT's. 700's will do even / much better.
(or they wait time at SAC on the down fast) ..
Best ever recorded speed in too many years travelling was about a 110 mph in the dip Elstree -Radlett on an NSE 317 , straight onto the DF from old St Pancras with a "keen driver" ...
Will be at Blackfriars today for the Brighton to Bedford run.
I'm gonna do it from East croydon to Farringdon
That's weird with the doors as we can override them quickly and even if say the front 4 opened you just click on the back of the train and release (cut down version).
I drove that recently and it had a few software issues.