There seem to be trains to Carlisle from Hellifield at:
1137
1340
1537
2015 (Ribblehead)
Trains from Manchester arrive in Clitheroe at xx17 and depart at xx40
I have been trying to play with this one and come up with the following:
Code:
Clitheroe.. a 10:17 11:17 12:17 13:17 14:17 15:17 16:17 17:17 18:17 19:17
Clitheroe.. d ----- 11:20 ----- ----- 14:17 15:17 ----- ----- 18:20 19:20
Hellifield..a ----- 11:44 LLLLL LLLLL 14:39 15:39 ----- ----- 18:44 19:44
Hellifield..d ----- 11:44 11:47 13:47 AAAA 15:43 ----- ----- AAAA AAAA
Settle......a ----- 11:53 11:56 13:53 ---- 15:53 ----- ----- ----- ----
Ribblehead..a ----- 12:10 12:12 14:10 ---- 16:09 ----- ----- ----- ----
Ribblehead d 13:14 13:45 15:23 ----- 17:42 17:50
Settle......d 13:29 14:00 15:39 ----- 17:57 18:05
Hellifield..a 13:37 14:08 15:48 AAAA 18:06 18:12 AAAA AAAA
Hellifield..d LLLLL 14:10 LLLLL 16:10 LLLLL 18:15 19:07 20:10
Clitheroe a ----- 14:34 ----- 16:34 ----- 18:37 19:30 20:35
Clitheroe d ----- 14:40* 15:40 16:40 17:40 18:40 19:40 20:40
The 06:40 could start at Hellifield or Settle running there ECS.
This timetable works by having a unit that was on maintainance run to Clitheroe DIT on the 11:17 arrival where it would be detached. One unit then runs through to Hellifield and Ribblehead (which I think is the easiest station for the train to terminate at) The other unit goes back as the 11:40
The 12:17 arrival stays in clitheroe and goes back as the 12:40
The 13:17 arrival stays in clitheroe and goes back as the 13:40
The train that has gone to ribblehead comes back following the Carlisle to Leeds train and is then in time to form the 14:40
This leaves the 14:17 arrival clear to continue to Hellifield where it is terminated, running into the watering point for steam trains.
The 15:17 arrival brings another DIT to drop at Clitheroe (which can have had mainatainance in the morning) to form the 15:40 while the rest continues on to join the 15:38 at Hellifield to Carlisle. This is then dropped off at Ribblehead. (could be run 3 minutes different like the earlier one)
The 16:17 arrival moves as normal to the Manchester platform where it is joined by the train back in from Hellifield (This has come from Hellifield watering point and then back behind the Leeds train at 15:48 - departure from Hellifield could be 16:10) where it goes into Manchester to provide extra capacity.
The 17:17 arrival goes back as the 17:40
The unit at Ribblehead comes back as a 17:50 from Ribblehead arriving into Clitheroe in time to form the 18:40
The 18:17 arrival is therefore free to run through to Hellifield where it would be in plenty of time to connect with the 18:55 S&C. The arrival from Carlisle is 20:01 and I do not think the unit would wait around for that so it would come back to form the 19:40.
The 19:17 arrival then runs to Hellifield and terminates. It does not have a connection north but could then wait in the northbound platform for the 20:01 arrival from Carlisle. It then runs to Clitheroe to form the 20:40
The 20:17 arrival from Manchester goes over to the Manchester bound platform and is attached DIT to the arrival from Hellifield. It then runs to Manchester as the 20:40
This set of diagrams are a bit wasteful in having the hour at Ribblehead for two units. They need two additional units for 3 hours each (one between 10:00 and 13:00 and one between 14:00 and 17:00), this can be done with maintainance rejigging and out of the units that are not used off peak. 5 trains are provided between Clitheroe and Hellifield with potentially 2 more running in the morning peak (northbound ECS).
A pretty good service I think and it would test if there is any demand for trains on the section. Creating turning facilities north of Ribblehead would allow better use of the units that are timed to sit at Ribblehead, but they can not reach Appleby so I suppose Ribblehead is as good as anywhere.