• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Could Freightliner Class 86s and/or 90s be fitted with batteries?

Status
Not open for further replies.
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

Jobi-wan

Member
Joined
14 Apr 2018
Messages
113
Location
Uk
The 86's are to be exported to Europe.

The class 99s are next to useless for hauling freight on diesel at only 2150hp
 

The Planner

Veteran Member
Joined
15 Apr 2008
Messages
19,728
The 86's are to be exported to Europe.

The class 99s are next to useless for hauling freight on diesel at only 2150hp
Wiki isn't always reliable, but surely its what it produces at the rails? a 66 is 2480hp.
 

Jobi-wan

Member
Joined
14 Apr 2018
Messages
113
Location
Uk
Wiki isn't always reliable, but surely its what it produces at the rails? a 66 is 2480hp.

So likely much less whp than 2150, again useless. They can't be that good if the FOC who have ordered them are trying to palm a load off onto other FOCs..
 

Jobi-wan

Member
Joined
14 Apr 2018
Messages
113
Location
Uk
Thanks. I thought that might happen but wasn’t sure so thanks for clarifying.
Sorry I can't be more specific, my employer has a very strict social media policy and I don't want to risk getting into trouble over anything, even if it is something as innocent as this! haha

The 90s are still great locos and perform well. Considering they've been downrated as well, hopefully it'll reduce wear too
 

ac6000cw

Established Member
Joined
10 May 2014
Messages
3,915
Location
Cambridge, UK
The class 99s are next to useless for hauling freight on diesel at only 2150hp
It was reported in the June 2022 Modern Railways that it will be a Cummins QSK50 engine rated at 2450 bhp (presumably at the crankshaft), which would relate to it being around 2150 hp at rail.

That's about the same as a class 47, so it certainly won't be 'useless' at hauling freight on diesel.

They can't be that good if the FOC who have ordered them are trying to palm a load off onto other FOCs..
Do you have a source for that, or is this just speculation/gossip?
 

43096

On Moderation
Joined
23 Nov 2015
Messages
18,879
So likely much less whp than 2150, again useless. They can't be that good if the FOC who have ordered them are trying to palm a load off onto other FOCs..
Given that you appear to be working for Freightliner at Ipswich, I’m smelling a massive pile of you-know-what. What’s the chances you really know the traction policy of GBRf, that they’re (allegedly) offering out as yet unbuilt locos that no one has yet seen let alone know their performance capabilities in the real world.
 

Jobi-wan

Member
Joined
14 Apr 2018
Messages
113
Location
Uk
It was reported in the June 2022 Modern Railways that it will be a Cummins QSK50 engine rated at 2450 bhp (presumably at the crankshaft), which would relate to it being around 2150 hp at rail.

That's about the same as a class 47, so it certainly won't be 'useless' at hauling freight on diesel.


Do you have a source for that, or is this just speculation/gossip?
Fair enough.

Yes I do, but not one I'm willing to share with you, kind stranger

== Doublepost prevention - post automatically merged: ==

It was reported in the June 2022 Modern Railways that it will be a Cummins QSK50 engine rated at 2450 bhp (presumably at the crankshaft), which would relate to it being around 2150 hp at rail.

That's about the same as a class 47, so it certainly won't be 'useless' at hauling freight on diesel.


Do you have a source for that, or is this just speculation/gossip?
I would like to add that pulling 1900-2100 tons up a steep bank with only 2150 at the rail is, in deed, next to useless. I speak from experience.
 

zwk500

Veteran Member
Joined
20 Jan 2020
Messages
18,639
Location
Northampton
I would like to add that pulling 1900-2100 tons up a steep bank with only 2150 at the rail is, in deed, next to useless. I speak from experience.
The proposal of the OP was AIUI for a last-mile type solution to avoid the cost of electrifying quieter branches but enabling freight to take advantage of OLE on mainlines when they get there. Felixstowe is not Beattock, so with 2,000 at the rail you'd like to think a Class 99 could haul 1600-1800 tonnes as far as Ipswich Yard where it can pan up.
 

ac6000cw

Established Member
Joined
10 May 2014
Messages
3,915
Location
Cambridge, UK
I would like to add that pulling 1900-2100 tons up a steep bank with only 2150 at the rail is, in deed, next to useless. I speak from experience.
Out of interest, what loco type was that, what was the gradient, and what speed did it manage on the climb?

Felixstowe is not Beattock, so with 2,000 at the rail you'd like to think a Class 99 could haul 1600-1800 tonnes as far as Ipswich Yard where it can pan up.
Exactly - and as far as I remember, when they first started talking about the class 99, GBRf or Stadler said they'd modelled the expected performance of the 99 on the Felixstowe branch with typical intermodals and found it was only marginally slower than a 66.

(...and as a comparison, over the last few decades there's been a small fleet of approx. 2500 hp-at-rail locos hauling 5000 tonne trains over Lavington and Savernake banks on the Berks & Hants route...)
 

geoffk

On Moderation
Joined
4 Aug 2010
Messages
3,933
Location
Exeter
https://twitter.com/TodaysRailways

According to Today's Railways UK, the stored 86s FL at Crewe are being prepared for export to Bulgaria - moved to Immingham by road, with up to three movements a week starting with 86622. Hope the Bulgarians have enough spares as they must be hard to come by.
 

randyrippley

Established Member
Joined
21 Feb 2016
Messages
5,382
https://twitter.com/TodaysRailways

According to Today's Railways UK, the stored 86s FL at Crewe are being prepared for export to Bulgaria - moved to Immingham by road, with up to three movements a week starting with 86622. Hope the Bulgarians have enough spares as they must be hard to come by.
given that these are old designs from before modern electronics, how easy would it be to use Soviet-era electrical parts from the likes of Electroputre as spares?
 

ac6000cw

Established Member
Joined
10 May 2014
Messages
3,915
Location
Cambridge, UK
My guess would be that some of the exported 86's will be used as a spares source for the others, but if FL is selling all of its 86's maybe it's sold its spares stock as well (as it has no further use for it)?

Are all the remaining FL 86's going to Bulgaria?
 
Status
Not open for further replies.

Top