• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Valentas - Gen & Discussion

Status
Not open for further replies.

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
Well, TBH, in February 2007 thanks to my trip up the ECML being caped due to bad weather I ended up on the 1925 STP - LDS, traction being provided by 43049 'Neville Hill' and 43072 'Derby Etches Park'. Later on during the journey I was near 072 and as we left Chesterfield, I could have sworn she sounded like a Valenta! :o

well they are manufactured both by Paxman, so that'll have something to do with it, cos MTUs of course are Brush. It's like 465 networkers sound different, dependent on if they have ABB or GEC motors, GEC ones are generally louder, and sound really high when they start
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

Techniquest

Veteran Member
Joined
19 Jun 2005
Messages
21,830
Location
Nowhere Heath
He knows of valentas and VPs which are known as 'screamers' and MTUs are 'boomers' :lol:.

I would have said MTUs were more of a throbbing sound than a booming sound myself.

Hope you get 046 tomorrow then and that she's screaming her guts out! Mind, if you do please do put it on YouTube!

EDIT: Miles, MTUs are of a German design/origin...:p
 

Chester025

Member
Joined
29 Jun 2008
Messages
1,066
Hi,

It would be much appreciated if somebody could get some gen on which Valenta Powercars are on what trains tomorrow, so I can try and work out some sort of move on Saturday to cover them.

Many thanks in advance,

Chester025
 

43034 The Black Horse

Established Member
Joined
2 Dec 2007
Messages
1,270
I think that is a fair summary. MTU do provide the engine electronics, but basically power car electrical system is Brush.
 

37412

Established Member
Joined
5 Dec 2007
Messages
1,253
Hi,

It would be much appreciated if somebody could get some gen on which Valenta Powercars are on what trains tomorrow, so I can try and work out some sort of move on Saturday to cover them.

Many thanks in advance,

Chester025

Been out spinning again today, had 046 as it is garunteed to be on the same diagram all the time as it's tied to the master cutler set. Over on the ECML all three Kings Cross - Aberdeen services had a valenta on them today, 056 was TGS end on the 1030 ex KGX, 051 TGS end on the 1400 ex KGX and 110 was allox on the 1600 ex KGX and is on the FC end (although I didn't see this set). Therefore out of Aberdeen tomorrow both morning departures 0752 & 0950 (?) will have a valenta on them, whatever works the 0752 is diagramed to go back to Aberdeen tomorrow on the 1600 ex KGX so it should mean that one of the Saturday morning sets from Aberdeen will have a valenta on for anyone doing the tyne valley diverts. 43053 is now back out (hasn't been out to play the last few days) and today did the 1130 KGX-NCL and 1555 rtn (I had it Darlington to the Cross and it sounded on top form). Will try and get the valenta gen again tomorrow ragardless of whether i'm going out again and let you know, hope that helps for now!
 

Chester025

Member
Joined
29 Jun 2008
Messages
1,066
Been out spinning again today, had 046 as it is garunteed to be on the same diagram all the time as it's tied to the master cutler set. Over on the ECML all three Kings Cross - Aberdeen services had a valenta on them today, 056 was TGS end on the 1030 ex KGX, 051 TGS end on the 1400 ex KGX and 110 was allox on the 1600 ex KGX and is on the FC end (although I didn't see this set). Therefore out of Aberdeen tomorrow both morning departures 0752 & 0950 (?) will have a valenta on them, whatever works the 0752 is diagramed to go back to Aberdeen tomorrow on the 1600 ex KGX so it should mean that one of the Saturday morning sets from Aberdeen will have a valenta on for anyone doing the tyne valley diverts. 43053 is now back out (hasn't been out to play the last few days) and today did the 1130 KGX-NCL and 1555 rtn (I had it Darlington to the Cross and it sounded on top form). Will try and get the valenta gen again tomorrow ragardless of whether i'm going out again and let you know, hope that helps for now!


Thank you!
 

Royston Vasey

Established Member
Joined
14 May 2008
Messages
2,992
Location
Cambridge
MTUs are made in Germany and only the electrics are by Brush IIRC. Could be wrong though.

You're correct Class313, Brush are nothing to do with MTU.

MTU are what eventually evolved from from Maybach, who provided power units for Hymeks, Westerns and Warships. Maybach was acquired by what is now DaimlerChrysler in 1960 and are now in the hands of private equity group.

MTU has some considerable engineering pedigree, having been founded by Ferdinand von Zeppelin, Wilhelm Maybach and Gottlieb Daimler.
 

37412

Established Member
Joined
5 Dec 2007
Messages
1,253
What is the Saturday diagram for the Master Cutler set?

As far as i'm aware there is no definate diagram for the Cutler set of a Saturday, it may not even be out but if it is it'll be on a Leeds starter diagram as thats where it finishes Friday night.
 

Techniquest

Veteran Member
Joined
19 Jun 2005
Messages
21,830
Location
Nowhere Heath
Bit of gen from HSTgen on Yahoo:

"43311 and 43056 on 09.30 edin -k x 056 screaming on back departing newcastle"

Thanks Wayne Hunt.

So where she goes tomorrow is still unknown, but since she finishes at Neville Hill tonight off the 2130 Kings Cross to Leeds, she'll be on the 0710 Leeds to Aberdeen, 0744 Harrogate to Kings Cross, 0642 Skipton to Kings Cross or 0700 Hull to Kings Cross I reckon.
 

class 313

Established Member
Joined
10 Dec 2005
Messages
6,475
Location
St Albans
I saw 046 today at Derby, I'm sure Rich can say the departure, but it grunted pretty nice. 082 just clagging away at Chesterfield with 083 being notched straight into 3 at Luton. Videos to come.
 

Techniquest

Veteran Member
Joined
19 Jun 2005
Messages
21,830
Location
Nowhere Heath
Ta to Lizard for the following:

GNER MTU 43313 leading Valenta GNER 43053 southbound through Finsbury Park at
1545.
 

37412

Established Member
Joined
5 Dec 2007
Messages
1,253
Neither of EMT's Valentas (46 or 64) out today, text HP this morning to try and find out as i could then plan my time in order to leave London on a Valenta, in the end it was 43060 & 43076 on the 1745 ex STP.
 

Chester025

Member
Joined
29 Jun 2008
Messages
1,066
Maybe their going to pair them up for the final few weeks before being VP185-ified?

FROTH!
 

37412

Established Member
Joined
5 Dec 2007
Messages
1,253
Were they both on exams or something? Unusual for them to both be on depot at the same time...

64 not been out since about last Friday, presume its off a set? 46 was tied to the cutler rake which may not have been out today? Dunno to be honest, all I know was neither of them were working!
 

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
046 is on the cutler rake at the moment, with 43066 on the other end (can't remember which is at the TGS) and 43064 has been on shed for at least a week, I assume that they will be paired so that when they go to be VP'd they don't have to bother with re-arranging the others. However, I reckon they are going to wait until 43089 joins the fleet so they can still have an extra PC available if needs must. if they run out then they could use just the one PC on a set :lol: (not being serious for those who are pedantic;))
 

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
it's not as loud as 43064 :( still nice when the driver powers up through the high tunnels on Derby-Sheffield :lol:
 

Techniquest

Veteran Member
Joined
19 Jun 2005
Messages
21,830
Location
Nowhere Heath
Not that it will be a lot of help to anyone, but 43110 and 296 should be on tonight's Skipton. Rather envious, I have to say!

37412: Gonna drop you a PM in a moment.

JW with the PM gen :lol:
 
Status
Not open for further replies.

Top