Yes platform 2 at tulse is 'too short' for 8 car thameslink trains but only because they stop a car length away from the existing DOO platform monitors for some reason (btw do they have in cab monitors?)
Also it could be due to signal sighting risks. More modern trains have lots of plastic pillars to the left/right of the driving position. Signal sighting from a 68 cab is 20m from the signal.
Going back to the ASDO on 185s, at Huddersfield last night the stopper from Leeds I was on (the 2020 arrival from Leeds) was diverted into P6 due to the booked P4 being occupied by a Northern unit. The guard announced that those in the rear carriage should move forward as the doors wouldn't open in the rear "because of where the sensors are".
I could have sworn I'd seen and caught 185s in that platform fairly recently, so is this a later update to the system or have I just missed it since the system went live?
That is also another good example, these train sets don't use all the platform as the Scarbrough end of the platform has a drop in height which is too great for passenger use. However the step height is different on 2 X 185's meaning it is safe for passenger use with some mitigation, i.e mind the step announcements.
Cheers. Though that might suggest that the system chosen by TPE is not the most up-to-date, which considering it was only rolled out in the last 12 months or so seems odd. That said under the proposed upgrade Platform 6 will be removed, and the TPE stopper doesn't use it in normal circumstances anyway so it isn't a big deal really. Even under social distancing, only myself and two others were in the rear coach anyway so it wasn't a big deal to move to a similarly loaded middle car.It may depend on the ASDO system in use. Newer ASDO systems will send a signal to the train telling it the correct number of coaches to release. However older systems would count the number of coaches that passed over, and release the doors of each coach that passed over the beacon. If the beacon is too close to the platform end, it may mean that the coach doesn't fully register as having passed over the beacon and so won't release.
Correct, Locomotive Leading (to Scarbrough) and the rear coach and a half off. Locomotive trailing all the train fits (except the crew doors).Another thought as an "extension" to the Malton situation, is Seamer. I don't think it can accommodate all of a Nova 3 set, possibly depending on the orientation of the set? I seem to recall the back carriage was off the platform Scarborough bound with the loco leading (it can't go beyond the signal as it would then be blocking the crossing) and the DT was slightly off. Whereas if the DT had been leading, it may have been fully platformed?
The same happens on Northern at Micklefield. My last Guard said something like "Ignore the announcement, the train fits fine"I've been on a 222 that stopped at Longport (due to the Midland Grand National at Uttoxeter), where it was announced that doors to the rear coach (that I was sitting in) wouldn't be opened. I've no idea why, as the whole of the train was in the platform.
Going back to the ASDO on 185s, at Huddersfield last night the stopper from Leeds I was on (the 2020 arrival from Leeds) was diverted into P6 due to the booked P4 being occupied by a Northern unit. The guard announced that those in the rear carriage should move forward as the doors wouldn't open in the rear "because of where the sensors are".
I could have sworn I'd seen and caught 185s in that platform fairly recently, so is this a later update to the system or have I just missed it since the system went live?
Elephant and castle P1 is another example.
An 8 car platform, only the front 7 coaches open in a 700 (465s stopping at the same platform open all 8).
because the platforms 2,3&4 are long enough for 12 cars
My apologies 5&6, 3&4 comfortably take 8 car 465s with platform to spare3&4 at Vic are 8
My apologies 5&6
The 319s used to regularly open their rear doors anyway, with us passengers treated to "DO NOT ALIGHT HERE" signs.
5&6 are 12 for 375/377s but 10 for Networkers
Sensors being in different places makes sense. However the first class carriage was at the rear (away from the buffers) on Monday.It all depends on what way round your train is, the position of the sensor that reads the beacon is in a different place on the 51xxx car to the 54xxx car due to the toilet retention tank position. At certain stations if your first class is at the rear, you can release all doors on the train, However if your train is the other way round it may only release the first two as the last carriage hasn’t passed the beacon for example.
You’ll notice this happen a lot on the 6 car stoppers. Some 4 car stations will actually open 5 car doors, but only if the two 185’s are facing a certain way.
I could be misremembering, but when New Cross Gate still got 12 car stoppers on the fast platforms (Class 377s on the way to Horsham I think) they would announce you needed to be in the front 8 cars to alight, but usually you could get out of the 10th. Distinct memory of something like that anyway.
Bescar Lane hasn't been extended so it's still only rear door for units in multiple, New Lane has been extended so this sounds like someone who hasn't read their notices.Just come home on the 15:56 from Gathurst to Southport, and the guard announced that only the rear doors would open at New Lane and Bescar Lane. Both platforms were recently extended to 4-car length (presumably for 769's?) , and sitting in the front car of 4 I thought we were in the platform at New Lane certainly; at Bescar Lane I didn't notice.
The same happens on Northern at Micklefield. My last Guard said something like "Ignore the announcement, the train fits fine"
The conductor on the same train this afternoon had read her notice and got it right, announcing the short platform at Bescar Lane only. On the other hand, the announcement "Attention conductor, call for aid activated" was repeated about 8 times between Bescar Lane and Southport. I didn't find out what it was all about; I hope it wasn't someone who had wanted to get off at Bescar Lane and missed the earlier announcement.Bescar Lane hasn't been extended so it's still only rear door for units in multiple, New Lane has been extended so this sounds like someone who hasn't read their notices.
Another station in this topic is Dalton - the down platform is long enough however the method of work is local door only - due to the height difference and the cant at the location the stepping distance is really bad, so the stopping location is the local door on the harrington hump.