This is something I've wondered for a while. What is the correct procedure to follow after a SPAD? Does the train continue to its final destination or will it be terminated at the next station?
Very much depends on the circumstances and train operator.
Following the SPAD the driver will contact the signaller (or vice versa) and complete a standard form over the phone.
The last question on that form is something along the lines of 'is the driver fit to continue'. Obviously a no in that box and it's game over.
Depends.
If the SPAD is clearly a signalling system issue, e.g. signal aspect changes from proceed to red in front of the driver, then the driver can continue as long as they feel fit to do so.
Very much depends on the circumstances and train operator.
Following the SPAD the driver will contact the signaller (or vice versa) and complete a standard form over the phone.
The last question on that form is something along the lines of 'is the driver fit to continue'. Obviously a no in that box and it's game over.
The signaller then gets hold of the train operators control room to ask what they would like doing with the train and driver.
For my company any drivers <2 years experience or already being monitored due to an incident will be relieved of duty immediately.
Most other times the driver would take the train to its destination or if passing another one of our depots and be relieved there.
That's the basic process. There are many variables and it will change operator to operator.
Depends.
If the SPAD is clearly a signalling system issue, e.g. signal aspect changes from proceed to red in front of the driver, then the driver can continue as long as they feel fit to do so.
I once read that if you pass a red on the tube, your shift was immediately over for the rest of the day
I wonder why they don't put them on gardening leave? As you said, having them sit around the mess room doesn't do anyone any good at all.Whilst off the train, the driver will generally be sitting around in the messroom, which isn't good for anyone.
I wonder why they don't put them on gardening leave? As you said, having them sit around the mess room doesn't do anyone any good at all.
Very much depends on the circumstances and train operator.
Following the SPAD the driver will contact the signaller (or vice versa) and complete a standard form over the phone.
The last question on that form is something along the lines of 'is the driver fit to continue'. Obviously a no in that box and it's game over.
The signaller then gets hold of the train operators control room to ask what they would like doing with the train and driver.
For my company any drivers <2 years experience or already being monitored due to an incident will be relieved of duty immediately.
Most other times the driver would take the train to its destination or if passing another one of our depots and be relieved there.
That's the basic process. There are many variables and it will change operator to operator.
Signaller does not contact train operator but passes details to his / her Network Rail Control and they liase with TOC as to what will happen to driver and train.
Some of our Signallers have direct contact with platform staff. They could directly speak with staff on the ground to make a decision.
Platform staff would not make a decision about a driver who had suffered a SPAR. That can only be made by Control.
If a a staff member became aware of a Driver who clearly looked shaken up after a SPAR/SPAD and they had direct contact with the Signaller then they can pass that information on. The Signaller can, will, and has, made a decision directly to take a Driver off. I can tell you for a fact that Signallers with direct contact with platform staff use their information to make decisions.
It is one of our first responsibilities. We must look out for each other. I can tell you for a FACT it happens at my location.
SPARs are a bit more of a grey area. I will always put the onus on the driver and ask very clearly 'driver will you be alright to continue?'. If they say yes then ultimately that's all I need to hear as a signaller - I trust a driver to make a professional judgement on their own abilities following an incident.
(It's also worth saying that it's a very difficult assessment to make as a signaller who could be 50 miles away, some people sound nervous on the phone whenever you speak to them)
That's the crappy thing about the railway. The buck gets passed and nobody accepts responsibility. The Driver said OK, so I let him continueI have less trust in a Driver to make a professional decision after a SPAR/SPAD or any incident than I have in the Sig. to make an informed decision. Once you have an incident of any form you really aren't in a good frame of mind, your judgement is skewed.
I have lost count of the numbers of signals gone back on me, (one quite bad recently) and I have made the decision to come off a few times. Each time, my line manager has questioned my judgement and pulled me up on cancelling the service and costing the company in terms of delays. I honestly believe that Drivers are put in akward situations and some will feel a lot of pressure to keep the service running. That single question about being Ok to continue is you guys putting that pressure on us to make the decision. Its way to easy to say yes and continue because of the pressure.
I wouldn't hesitate in pulling a driver off (in the kindest way possible)
It's got me thinking though (worryingly...) - as a driver, what would I be asking you in an ideal world?
If a a staff member became aware of a Driver who clearly looked shaken up after a SPAR/SPAD and they had direct contact with the Signaller then they can pass that information on. The Signaller can, will, and has, made a decision directly to take a Driver off. I can tell you for a fact that Signallers with direct contact with platform staff use their information to make decisions.
It is one of our first responsibilities. We must look out for each other. I can tell you for a FACT it happens at my location.
Sorry, but that is rubbish.
Signallers make no decision on whether the driver continues after a SPAR, we just report to Network Rail Control who pass it to the Operator and they make the decision.
Platform staff would NOT make the decision either.
The only thing a signaller may do is pass the decision made by Control on to the driver, but in my experience that will be done directly by the TOC Control phoning the driver.
I'd like there to be a form/questionnaire that can be gone through to make that process simple. "Are you fit to continue" is just part of the blame culture and serves little purpose other than to shift liability.
Going through a Red, on plain line at linespeed is freaky but not much of a bother. Going through Red at a junction is scary and can really affect you. Going past a Red and seeing a unit come across the junction is life affirming.
Its impossible to tell if they affect you, until its too late.
Sorry, but that is rubbish.
Signallers make no decision on whether the driver continues after a SPAR, we just report to Network Rail Control who pass it to the Operator and they make the decision.
Platform staff would NOT make the decision either.
Typically I get. "You ok to continue ?" "Yes Signaller" "ok, please wait for a proceed aspect"
Don't even fill out a 3185 some days.
Sorry, but that is rubbish.
Signallers make no decision on whether the driver continues after a SPAR, we just report to Network Rail Control who pass it to the Operator and they make the decision.
Platform staff would NOT make the decision either.
The only thing a signaller may do is pass the decision made by Control on to the driver, but in my experience that will be done directly by the TOC Control phoning the driver.