In the mid-1970s this was how the incoming Sleeper services were dealt with at Euston to allow Sleeping Car Passengers to remain in their berths until 0730.
The method of operation was reasonably interesting. Sleeping Car passengers were allowed to remain in their berths until 0730, meaning that the station would soon fill up with trains that couldn't be moved until after 0730. So to free up platform space this is how the operation worked.
First in would be 1A00 2046 from Barrow-in-Furness due in at 0228. The train was usually made up with a TPO vehicle at the front, followed by several Mark 1 Full Brake Vans, then three or four Mark 1 passenger coaches, with two Sleeping Cars and a Mark 1 Full Brake on the end. (At one time this had an extra Sleeping Car which was attached at Preston). On arrival the Station Pilot engine (normally a class 25) would go onto the back, and the Full Brake plus the two Sleeping Cars would be detached. These would then be shunted into Platform 15, on top of a pre-positioned AC Electric Loco which would heat the stock overnight. The Pilot engine would then be detached for the next move. In the meantime another loco would be attached to the other part of 1A00, removing the stock to Willesden at 0330.
Next in would be 1A01 0027 off Manchester, due in at 0412. This would also be made up of up to seven passenger Mark 1 coaches and Vans, with three to four Mark 1 Sleeping Cars on the back plus another Mark 1 Full Brake. The station Pilot would pick up the Van and Sleeping Cars and add them to the other Sleeping Cars off 1A00 in Platform 15. Another engine would attach to the other bit of 1A01 and work the stock to Willesden at 0500.
1A02 0030 off Liverpool, due in at 0441, would be of a similar composition to 1A01. The Station Pilot would pick the Sleeping Cars and van off the back of 1A02 and attach them to the others off 1A00/1 in platform 15. The rest of 1A02 would depart for Willesden at 0545.
The last one to involve shunting would be 1A04 0110 from Holyhead due in at 0613. Formed similarly to 1A01/2 it had one or two Sleeping Cars plus another Full Brake at the back. Again the Station Pilot would shunt the Sleepers and Van onto the others in Platform 15. The rest of 1A04 would depart for Willesden at 0650. The train in Platform 15 was now a mixture of Sleeping Cars and Vans, and would remain there until the passengers had vacated their berths, departing as 5A50 to Willesden at 0750. During the day Willesden would be busy reforming these Sleeping Cars into the northbound services for the next evening.
These movements would free up platform space for the rest of the Overnight Sleepers coming from further afield.
1M13 2210 off Glasgow ran via the GSW route via Kilmarnock, due in at 0524, not leaving for Willesden until 0830.
1M11 2310 off Glasgow due in at 0534 remained in the station until 0815 before leaving for Willesden.
1M10 2230 off Glasgow, also ran via Kilmarnock, due in at 0557, and was worked out to Willesden at 0755.
1M12 2140 off Perth (started from Inverness on Sunday Evenings) was due in at 0634 also had a TCV (Twin deck Car carrier) on the back, which required the Station Pilot to detach it and move it to 19 road in the Parcels area for unloading. The rest of 1M12 left the station at 0725 (which was the one exception to the 0730 rule for the Sleeping Car passengers, in this case 0715).
1M15 1930 off Inverness due in at 0713 departed for Willesden at 0822.
1M14 2230 off Stranraer Harbour due in at 0743. This train ran via the Birmingham area, but didn’t stop there, mainly to ‘lose it’ for a while so a platform could be freed up to deal with it by the time it got to us. The empty stock departed for Willesden at 0839. This service sometimes would produce one of the small number of Stanier Full Brakes (Plain Blue Livery) attached to the rear.
The following year would see the introduction of another extra service from Inverness & Fort William, 1M16.
Andy.