• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Hornby 156

Status
Not open for further replies.

Bittern

Established Member
Joined
8 Apr 2009
Messages
1,919
Location
Scotland
Just wondering how good are the recent models of the 156s by Hornby? I've taken a wee look around Hattons and am tempted by the Saltire 156 (which I've always thought looked quite pretty IRL).

One thing that bigs me about it though is the roof. It's blue when most of the Saltired 156s have grey/black roofs. I'm thinking a good way to fix this would be to primer the roof and black/grey spraypaint it with masking tape over the rest of the train where I don't want paint to be. Think this would work?
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

hairyhandedfool

Established Member
Joined
14 Apr 2008
Messages
8,837
You can remove the roof quite easily so no masking should be needed, it simply clips on.

The Hornby model is the old Lima one with a new motor, which is good enough for that unit and maybe a dummy unit too, and a DCC socket. There are no working lights on the model.

There is a set of parts by Hurst Models if you wish to replace the rather boxy underframe equipment and get some deflectors/snow ploughs.
 

142094

Established Member
Joined
7 Nov 2009
Messages
8,789
Location
Newcastle
I bought a 156 of eBay a few years back which had the underframe work done (not cheap, set me back around £100). Didn't have the time to do the work myself, but it does look much better IMO.
 

Bittern

Established Member
Joined
8 Apr 2009
Messages
1,919
Location
Scotland
You can remove the roof quite easily so no masking should be needed, it simply clips on.

The Hornby model is the old Lima one with a new motor, which is good enough for that unit and maybe a dummy unit too, and a DCC socket. There are no working lights on the model.

There is a set of parts by Hurst Models if you wish to replace the rather boxy underframe equipment and get some deflectors/snow ploughs.

I see. A wee bit of the Saltire does go onto the roof so some masking would still be required but it's nice to know not it's not much.

As for the underframe, I don't really know much about that, to be honest. I don't pay attention to stuff like that and as long as it's a fairly good representation of a ScotRail 156 I'm happy. The only reason the roof gets me is because it effects the look of the front of the unit slightly. The snow deflectors, however, are a necessity.

Thanks. :)
 
Status
Not open for further replies.

Top