• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Hanson 56's

Status
Not open for further replies.

60081 50B

Member
Joined
14 Sep 2008
Messages
7
Location
Leeds
Hanson will soon be running tripple headed 56s on many freight workings, and are also investing in retired paxman valenta engines to replace the brush engines in some more 56s, to see what happens. These will be designated as class 56/9s. They will be painted in bright pink and will have the words froth, veg and ned written down the side in bold red letters. There will also be a Cross Country logo on the front, as XC are intending on using them on the Aberdeen-Penzance services (quadruple headed obviously) to drag voyagers, and are installing droplights in voyagers' doors to up their passenger numbers as bashers flock to their services to hear grid thrash. This is expected to happen by February.


:roll:;)

This post's 88 days early - April 1st is three months away;)

Of course Hanson would have preferred triple headed 4472 4468 and 60163 but they couldn't afford the coal.
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

Phoenix

Established Member
Joined
11 Mar 2008
Messages
2,019
Location
birmingham
And maybe a sensible reply might be formed in this thread but the re-engined Grids are more likely.
I really give up sometimes.....
 

Pumbaa

Established Member
Joined
19 Feb 2008
Messages
5,022
I detect a serious sense of humour failure. Get over it.
 

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
This post's 88 days early - April 1st is three months away;)

Of course Hanson would have preferred triple headed 4472 4468 and 60163 but they couldn't afford the coal.

aah they could just nick some every time they went past a DB or Fastline coal train and shove it in the firebox :lol:

as an alternative, they might be buying some deltics and fitting them with 5 cummins engines that they use in 156s, so that both deltic neds and unit neds can enjoy this creation - a 55/9. Killed two birds with one stone they did! :p;)
 

FusionRail

Member
Joined
3 Sep 2007
Messages
960
Location
Shackerstone
And maybe a sensible reply might be formed in this thread but the re-engined Grids are more likely.
I really give up sometimes.....

I gave you a sensible reply. Read it and it will give you the most reliable info on the HT 56 fleet so far posted on this forum.

Re-engined grids? For a start 56's use a 'tuned up' V16 version of a HST engine, made by Ruston Paxman, not Brush.

Replacing a 16RK3CT with a Val would reduce the power of a 56 to a pointless level.

I do love the idea of painting Neds etc on the sides though <D
 

D9521

Member
Joined
15 Oct 2007
Messages
135
haha now thats someone with a sense of humour (sulzer125) i would pay to see that in all fairness it sounds hilarious.. all the deltic veg would be like "DELTIC" and then it revs up to reveal unit thrash and then all the unit veg become to happy for the health and safety case..
 

Phoenix

Established Member
Joined
11 Mar 2008
Messages
2,019
Location
birmingham
I gave you a sensible reply. Read it and it will give you the most reliable info on the HT 56 fleet so far posted on this forum.

Re-engined grids? For a start 56's use a 'tuned up' V16 version of a HST engine, made by Ruston Paxman, not Brush.

Replacing a 16RK3CT with a Val would reduce the power of a 56 to a pointless level.

I do love the idea of painting Neds etc on the sides though <D

I know you gave me sensible answers and sorry for not acknowledging that.
It's just that some people on this forum are either plain rude or love confrontation as a group of individuals seem to hijack most posts they can't answer with their mindless dribble.
 

D9521

Member
Joined
15 Oct 2007
Messages
135
I know you gave me sensible answers and sorry for not acknowledging that.
It's just that some people on this forum are either plain rude or love confrontation as a group of individuals seem to hijack most posts they can't answer with their mindless dribble.


"Mindless dribble" plain rude? contradicting yourself there arn't we?
 

Phoenix

Established Member
Joined
11 Mar 2008
Messages
2,019
Location
birmingham
"Mindless dribble" plain rude? contradicting yourself there arn't we?

Yes I am and I realise I am being quite rude so I'll knock it on the head.
Just in the last few days I have found a few people to be rude so I just think why should I be nice but sorry (honestly).
 

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
Hanson have just released their refurbished Cummins deltic from Barrow Hill (55901):

attachment.php


:p;)
 

Attachments

  • froth.JPG
    froth.JPG
    59.2 KB · Views: 46

Muppet56097

Member
Joined
10 Sep 2008
Messages
19
Re-engined grids? For a start 56's use a 'tuned up' V16 version of a HST engine, made by Ruston Paxman, not Brush.

Sorry, but that is total nonsense.
They are completely different engines.

The 16RK3CT was a development of the 16 cyl English Electric engine fitted to e.g class 40s and class 50s. That is its family heritage.

The Valenta was an entirely different design, and entirely different size, and designed to run in a different rev range.

Class 56s DO have quite a lot in common with HSTs in terms of electronics and brakes, but not engines. The Napier SA-085 turbochargers on a 56 sound a bit like the single SA-084 on an HST, but that's it.
 

FusionRail

Member
Joined
3 Sep 2007
Messages
960
Location
Shackerstone
Sorry, but that is total nonsense.
They are completely different engines.

The 16RK3CT was a development of the 16 cyl English Electric engine fitted to e.g class 40s and class 50s. That is its family heritage.

The Valenta was an entirely different design, and entirely different size, and designed to run in a different rev range.

Class 56s DO have quite a lot in common with HSTs in terms of electronics and brakes, but not engines. The Napier SA-085 turbochargers on a 56 sound a bit like the single SA-084 on an HST, but that's it.

Ned.
 

37402

Member
Joined
15 May 2007
Messages
532
well to be fair as he states in his name hes a Muppet.

And I dont care whether you pleasure yourself over engine specs and models, just keep it to yourself.
Well, if you are the type of person that Hanson employs to look after their grids (and I doubt it after your little faux pas earlier) then I am seriously worried.

I can see the headlines now:
"Hanson's Latest 56 Overhaul Suffers Setback After HST Engine is Installed"

:lol::roll:
 

D9521

Member
Joined
15 Oct 2007
Messages
135
haha yes coz it was FusionRails idea in the first place to do that :roll: rem.. whoeva it was now i cant be botherd lookin they havnt got a clue.
 

87015

Established Member
Joined
3 Mar 2006
Messages
5,078
Location
GEML/WCML/SR
haha yes coz it was FusionRails idea in the first place to do that :roll: rem.. whoeva it was now i cant be botherd lookin they havnt got a clue.

He's the one that accused us of "have you ever looked inside a 56" then showed complete dud gen on whats inside then called someone who owns and has pretty much rebuilt a 56 a "ned" which is almost the most ironic thing I've ever seen!!

Lets have some more one word summaries for you and your friend;

Clowns.
 

FusionRail

Member
Joined
3 Sep 2007
Messages
960
Location
Shackerstone
Well Im so sorry I compared a 56 engine to a 43 engine.

How can I accuse you of not looking inside a 56? That doesn't really make sense.

Dud gen? On what? Not really. I only compared 2 engines made by the same manufacturer.

Anyone can be a Ned doesnt matter if they have rebuilt a space shuttle and flew it to Jupiter and back.

Clowns? Maybe we should meet up and mull it over, ill dig out my big red shoes and hat from somewhere..
 

Jord

Member
Joined
21 Jun 2007
Messages
1,180
Location
Aberdeenshire
Mmmmm...

Can't wait to do Heads Out of a Voyager droplight while having 4 x 56s at the helm on the Aberdeen - Penzance! <D :lol:
 

D9521

Member
Joined
15 Oct 2007
Messages
135
Clowns? Oh no.. Might need some ice for that burn :lol: what ever has been said or not said the comment if your the type of person that hanson is goin to employ to look after their 56's then im worried is seriously pathetic..
 

P156KWJ

Established Member
Joined
26 Nov 2007
Messages
4,226
Location
Nottinghamshire
Mmmmm...

Can't wait to do Heads Out of a Voyager droplight while having 4 x 56s at the helm on the Aberdeen - Penzance! <D :lol:

XC scrapped that due to the fewer than expected number of people, due to the refurbished 56s not being hellfire enough :cry:;)
 

class56fan

Member
Joined
1 Feb 2009
Messages
5
im just pleased their working. and another 2 have been saved one being 56101 and the other im not at liberty to say!
 
Status
Not open for further replies.

Top