47286Dan
Established Member
- Joined
- 27 Dec 2018
- Messages
- 2,014
Tuesday morning update
93006 GROG INVERNCMD 010Q161H10 F YORK P SD N
Dan
93006 GROG INVERNCMD 010Q161H10 F YORK P SD N
Dan
The locomotive appears to be performing exactly as anticipated.I’ve only just found this driver’s account of the trial of 93006 on 4Q38 Seaforth- Mossend on 11 February, the commentary is a technical but interesting read from the driver’s point of view:
![]()
Class 93 Testing with DB Cargo UK. 4.
My final shot was taken at Carlisle during a crew change on 4Q38 14.18 Seaforth Docks to Mossend Euro Terminal. The full test crew from ROG, Network Rail and DB Cargo line up for a group photo with me included (second in from the right) on this momentous day as it was also the first electric...www.flickr.com
== Doublepost prevention - post automatically merged: ==
I’ve only just found this driver’s account of the trial of 93006 on 4Q38 Seaforth- Mossend on 11 February, the commentary is a technical but interesting read from the driver’s point of view:
Trying to recall, but pretty sure its automatic battery charging.How does the driver manage the battery? It mentions on the wiki page (which I appreciate may not be accurate) that the battery can be recharged from the overhead power, the engine and through braking, is that handled automatically by the locomotive or does the driver have to choose when and how to charge the battery? Similarly how do they choose when to use the battery, the article mentions it can be used on its own and in addition to the diesel engine?
I was also wondering about some markings above the left bogie (when looking side on with the number 2 cab to the left), it has a distance 21.22m with some markers labelled HYBRID COUPLER and then similar text with 20.50m and UIC COUPLER. I know the locomotive can have different couplers but not sure what these markings down the side of it mean.
Makes sense with the Stadler links there already. Can't wait for the first person to put 2 and 2 together and get DRS as the answerModern Railways reporting that the Class 93s will be based at Gresty Bridge - https://www.modernrailways.com/article/new-base-rogs-class-93-fleet
SBB Cargo International has now set the load for the four-axle Siemens Vectron Xload (the Tim “More Power” Taylor model of the Vectron) at 2000t on a gradient of 12 per mille (comparable to the 1/75 of Shap Summit).Interesting commentary on that. Performance on diesel / hybrid mode has been a big question mark around the 93s, so it's good to seem some empirical evidence of their abilities in this mode on a heavy train on a gradient with poor adhesion.
I have 93007 as doing it's first revenue earning work on 23.12.25: [Regretfully I did not record what the actual job was, but further up this string you might find the answer]I'm trying to figure out the first workings (after acceptence testing, etc) for 93003, 93007 and 93009.
Can anyone help me with this ino, please?
Many thanks
I have 93007 as doing it's first revenue earning work on 23.12.25: [Regretfully I did not record what the actual job was, but further up this string you might find the answer]
It is interesting that 93003 and 93009 do seem to have done a few things together, for instance they both attended the Greatest Gathering at Derby last August, but this was hardly "revenue earning" !! Also, they are both out and about together in recent days on some sort of 0Qxx moves based on Peterborough, again not revenue earning. However, 93003 did go to Biscester on 06.01.26 (see post 2189) the reason never being assertained - but this could possibly have been for shunting there - which if so, would be revernue earning !Just found this while searching for the above - photo of 93007 working a 7Q25 Gascoigne Wood - Attercliffe (JNA wagons for scrap) on 17/12/25:
https://www.flickr.com/photos/72334387@N03/54989954704 (Photo: Dan-Piercy)
Repeat run on 23/12/25:
Swinton 23 December 2025 93007 ROG | Tomasz Pado EN-PL
Many thanks @wickham and @Adrian Barr - very helpful.It is interesting that 93003 and 93009 do seem to have done a few things together, for instance they both attended the Greatest Gathering at Derby last August, but this was hardly "revenue earning" !! Also, they are both out and about together in recent days on some sort of 0Qxx moves based on Peterborough, again not revenue earning. However, 93003 did go to Biscester on 06.01.26 (see post 2189) the reason never being assertained - but this could possibly have been for shunting there - which if so, would be revernue earning !
Indeed ! In fact are the acceptance dates known for any (or all) of them ?Many thanks @wickham and @Adrian Barr - very helpful.
I was aware of 7Q25 on 17/12 - interesting to note the 'Q' code unusual for a revenue earning service.
Whilst no revenue earning trips are known for 93003 and 93009, it looks as though they've been accepted for service (?) - does anyone know when?
Cheers
5Q02 1128 Carlisle to Inverness C.S.D. is en route today and on RTT. According to 2 other sites the locos are 93009 and 93008.93006 and 93009 worked Derby RTC to Carlisle on 16/03. From RTT it looks like they went into the station holding sidings. Does anyone know what their next move is? I can't see any movement for today on RTT.
Thanks for the info. It is 93009 and 93008 as you say.5Q02 1128 Carlisle to Inverness C.S.D. is en route today and on RTT. According to 2 other sites the locos are 93009 and 93008.
Barriers to pick up some HST vehicles from Inverness an take them to Hamilton tomorrow:5Q02 1128 Carlisle to Inverness C.S.D. is en route today
So this IS INDEED Revenue earning - the first for 93009 !!Barriers to pick up some HST vehicles from Inverness an take them to Hamilton tomorrow:
Realtime Trains | 5Q07 1125 Inverness C.S.D. to Hamilton Steele E.G. | 18/03/2026
Real-time train running information for 5Q07 1125 departure from Inverness C.S.D. to Hamilton Steele E.G. on 18/03/2026. From Realtime Trains, an independent source of train running info for Great Britain.www.realtimetrains.co.uk
It would be nice if it was photographed or video'd, I look forward to finding one or a link being posted...So this IS INDEED Revenue earning - the first for 93009 !!
Just 93006 to go now, unless anyone knows anying different. It is difficult to tell what is "revenue earning" and what isn't when thety use thse "Q codes".
Why do they need barriers? I thought they could couple to M.U.'s - that was the whole reason for ordering them - no?Barriers to pick up some HST vehicles from Inverness an take them to Hamilton tomorrow:
Realtime Trains | 5Q07 1125 Inverness C.S.D. to Hamilton Steele E.G. | 18/03/2026
Real-time train running information for 5Q07 1125 departure from Inverness C.S.D. to Hamilton Steele E.G. on 18/03/2026. From Realtime Trains, an independent source of train running info for Great Britain.www.realtimetrains.co.uk
Just 93006 to go now, unless anyone knows anying different. It is difficult to tell what is "revenue earning" and what isn't when they use these "Q codes".
It would be nice if it was photographed or video'd, I look forward to finding one or a link being posted...
The 93s have only standard screw couplers (though one seems to be being tested with the unit coupler reinstated?). That’s irrelevant anyway as they don’t have Buckeye/Alliance couplers to move HST stock.Why do they need barriers? I thought they could couple to M.U.'s - that was the whole reason for ordering them - no?
93002 was hiding very effectively when I went past Gresty Bridge this afternoon - not a traceWednesday morning update
93001 GROG WORKSP DY WORKSP DY F N
93002 GROG GRESTYBGE GRESTYBGE F N
93003 GROG WORKSP DY WORKSP DY F N
93004 GROG WORKSP DY WORKSP DY F N
93005 GROG DERBY RTC 570Q231F18 F DONCASTER N
93006 GROG WORKSP DY WORKSP DY F N
93007 GROG DERBY RTC DERBY RTC F N
93008 GROG INVERNCMD INVERNCMD V N
93009 GROG INVERNCMD INVERNCMD V N
93010 GROG WORKSP DY WORKSP DY F N
Da