Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!
Zone of speed restriction over, resume prescribed speed
1—2
Close doors
2
Ready to start
Start train
2—2
Do not open doors
Passing automatic signal at 'on'
3
Set Back
Guard required by driver
3—1
Lock central door locking
3—2—1
Testing doors
3—3
Guard required by driver, or guard or driver to speak on the telephone
Guard's warning when the motorman exceeds the speed prescribed
3—3—1
Release central door locking
4
Slow down
Protect train in rear
5
Driver/Guard leaving the train
6
Draw forward
9
Police assistance required
All codes, except 3—2—1, must be acknowledged by repeating the code received.
Although I’ve observed that historically, when I was going to school in the 1970s, the 2 was never acknowledged.
== Doublepost prevention - post automatically merged: ==
Otherwise, the random beeps tend to be along the lines of “I’m in the toilet and I’m confused and there’s a big red button”
1 = Stop
1-2 = Close Doors (Power Doors)
2 = Ready To Start
2-1 = Token Received (RETB Lines)
2-2 = Do Not Open Doors
3 = Set Back
3-1 = Lock Central Door Locking (Slam Doors)
3-2 = Release Doors (Power Doors)
3-2-1 = Testing Doors
3-3 = Driver Or Guard To Attend Telephone
3-3-1 = Release Central Door Locking (Slam Doors)
4 = Slow Down
5 = Driver Or Guard Leaving The Train
6 = Draw Forward
9 = Police Assistance Required
Anyway i do not think the beep referred to is a driver guard beep. The 387s use a bell sound. It is a proper old fashioned traditional bell both in the saloon and the cabs. The 387s do not have any beeps for this. So whatever the beeping was is something different.
Where exactly were you sitting? Was in behind the cab or further away or in another carriage? When did the beep play? For example was it when stationary at the station or when departing or arriving or whist the train was on the move between stations? This may help us identify exactly what the beep was. If you were sitting behind the cab then it could have been something from in there. For example it could have simply been the driver vigilance alarm or it could have been the MITRAC train management system indicating a fault. There are many things it could be.
387's always depart Paddington DOO so it won't be a bell code, plus the 387's have bells and not buzzers.
I'm pretty sure every time the DDS is moved from neutral to Forward/Reverse a beep sounds, the fault alarm sounds like the DSD beeps so could be that, GSM-R beeps once logged in, other than that, can't think of much else
387's always depart Paddington DOO so it won't be a bell code, plus the 387's have bells and not buzzers.
I'm pretty sure every time the DDS is moved from neutral to Forward/Reverse a beep sounds, the fault alarm sounds like the DSD beeps so could be that, GSM-R beeps once logged in, other than that, can't think of much else
That does sound like it, but the only thing I would have to say to that is I was in the middle of the train, and that I doubt the driver would be changing directions going 100 mph xD
That does sound like it, but the only thing I would have to say to that is I was in the middle of the train, and that I doubt the driver would be changing directions going 100 mph xD
The GSMR can provide a constant beeping through the PA system to test continuity throughout the train and is one of the steps of fault finding either a Cab communications fault, so it might have been that
We are aware of an issue with emails from the Forum to Microsoft-based email accounts (hotmail/outlook/live.com email addresses). This is being looked into currently, thanks for your patience meanwhile.