DarloRich
Veteran Member
This morning 08882 hauled 37502 from Wolverton to bletchley along the WCML
Obviously I am at the other end of the country.......
Obviously I am at the other end of the country.......
501/601? Looks like it in the photo.This morning 08882 hauled 37502 from Wolverton to bletchley along the WCML
Obviously I am at the other end of the country.......

Still in the sidings when I passed northbound on 1S52. Nice to see it out and about!This morning 08882 hauled 37502 from Wolverton to bletchley along the WCML
Obviously I am at the other end of the country.......
i wonder how long it will stay on site? I wonder why an 08 would be needed to shunt the carriage sidings?Still in the sidings when I passed northbound on 1S52. Nice to see it out and about!
I think the depot works are complete. There was a DBS class 66 in the carriage sidings today with a short rake of red wagons.I am led to believe this is more to do with the depot itself rather than the Sidings. As the depot is undergoing improvement works it is there to shunt materials etc around the works
I can't open that FB link (I don't have a FB account) but is it a different Tractor in the video? Post 2 photo is 08822 + 37501.There's a bit of a cab video with 08822 and 37503 on FB off to Bletchley, date unknown but very recent.
![]()
5.7K views · 172 reactions | Here’s a short clip of 08822 hauling 37501 to Bletchley Great to see the locomotive stretching its legs like they used to — proper main line action and a sight that takes you back. | RMS Locotec
Here’s a short clip of 08822 hauling 37501 to Bletchley Great to see the locomotive stretching its legs like they used to — proper main line action and a sight that takes you back.www.facebook.com
I thought the ex-Thornaby 37/5s were turning up en masse!37501, 37502 and now 37503 have been quoted on here now!
Defo only 37501 in BS blue, as per the photos on Flickr.
![]()
08822 37501
when was the last time a class 08 was on the mainline class 08 08822 leads 0j77 Wolverton center sidings to Bletchley tmd with 37501 on the rear as insurance through milton keynes centralwww.flickr.com
I think you have to remove the wheel bars? to haul an 08 so would have then needed to re-fit in the sidings at BletchleyI've seen a few references to the 37's presence as "insurance" - that being the case, why not just haul the 08 with the 37? Would be interested to understand the reasoning and process behind it. Must have been a clever bit of planning to get it down the WCML in daylight!
There's half an hour between passenger services on the Down Slows north of MK, and it only needed to get from Wolverton to Denbigh Hall South, where it can turn out onto the Bletchley Relief No.2. At 15mph it'd have taken about 15 minutes to travel the c.4 miles, it's tight but not especially so, even with the 4 minute headway on the Slows.Must have been a clever bit of planning to get it down the WCML in daylight!
Interesting, thanks - I presume the crew were told to be ready to get on with it when the signal cleared!There's half an hour between passenger services on the Down Slows north of MK, and it only needed to get from Wolverton to Denbigh Hall South, where it can turn out onto the Bletchley Relief No.2. At 15mph it'd have taken about 15 minutes to travel the c.4 miles, it's tight but not especially so, even with the 4 minute headway on the Slows.
Connecting rods removed and traction motors demeshed allows an 08 to be hauled at up to 25mph. I'm led to believe that demeshing traction motors on these isn't a particularly convenient job to do, so easier to have the 08 do the hauling at 15mph max. Also eliminates any possibility, however unlikely, of the 37 exceeding the 08s' limit.I think you have to remove the wheel bars? to haul an 08 so would have then needed to re-fit in the sidings at Bletchley
Visions of a shunter driver, getting the go a d wheels spinning as it "raced" to top speed.Interesting, thanks - I presume the crew were told to be ready to get on with it when the signal cleared!
Connecting rods, That’s what I was trying to remember. Glad I’m not going totally insaneConnecting rods removed