Class 60 haulage was a pre-requisite to enable the Jarrow to be increased to load 30. Permitted to be a Class 66 only in emergency circumstances or when the load is reduced.Single 66s have been seen on the Jarrow - Lindsey tanks, although apparently double 66s are needed. Has been 60s for the past week or two which is good to see.
Class 60 haulage was a pre-requisite to enable the Jarrow to be increased to load 30. Permitted to be a Class 66 only in emergency circumstances or when the load is reduced.
Let this be a salutary lesson to anyone thinking they might like to take a "modern" diesel loco into preservation at any point.... if the numbers are right, each loco has cost over £450k to overhaul, and that's based on in-house labour.
Still, park a loco in a siding for three or four years and what can you expect?
when it says "a super 60 has been released into operations" are they referring to 60011 in its new DBS red coat, because some people reckoned it had merely been repainted and not overhauled?
Yes, because D43 is empty therefore within load for a single 66.It has definately been a single 66 out of Tyne Yard going south on a few occasions, has been reported by a DB driver who works out of Tyne Yard. However this is very rare, normally it is doubled up 66s. The terminal at Jarrow is small so all the workings going north are split at Tyne Yard anyway, with two workings from Tyne Yard to Jarrow per day.
Half a million quid? That's 120 quid/working day over 15 yrs. Guess what, maybe the additional load revenue generates it, and more. Well done Brush. Glad to see DBSchenker can see beyond a two-year payback.
I was in Cardiff today, and at 19.50, DBS red 60011 passed with Murco tanks to Margam yard, and the train had approached slow from the east, and accelerated through Cardiff Central station. There was no characteristic deep rumble of a tug engine on this train which happens when it is slowed when the road isn't clear. wonder what's been done to it!?
Yes, because D43 is empty therefore within load for a single 66.
It's N03 that is the problem...if its loaded to 30 cars, it is a requirement to have a 60 (or equivalent i.e. 2x66).
I was simply pointing out that this is well beyond the means of most privateers in the preserved railway world and that as locos and other rolling stock become more and more complicated, it will be more and more difficult for them to find their way into preservation.
Without being unkind... Would anyone really want to preserve one?
They are designed to be lugging workhorses, have an RA of 7, can manage 60mph and no heating supply.
When something is preserved, it still needs to earn its keep - so unless a preserved line happens to provide an income generating spur to a super-quarry or other heavy indusry and fancies supplying the traction - they are pretty much going to be a static exhibit.
Well, they do have their very own Preservation Group, so there is clearly plenty of intent to have a 60 preserved.Without being unkind... Would anyone really want to preserve one?
The Class 60's were my second most favourite loco to work on. They had bags of power and very comfortable cabs that were also very quiet. The ride quality was also very good. It's been sad seeing them being run-down and neglected. This is good news and it is nice to know that some of them will still be around for some time yet.
I hope that the cabs have been improved as they were getting very grubby. The driver's seats were also well worn and I would hope they have been refurbished or replaced.
Nothing has been done to 60011 apart from a bit of bodywork, attention from a paintbrush and fixing an oil leak. 60007 is to be the first full overhaul.Crikey, im guessing that a thorough and proper engine overhaul has at last been carried out then! A complete strip down and rebuild job by the sounds of it...Makes a change for DB/EWS!
Without being unkind... Would anyone really want to preserve one?
They are designed to be lugging workhorses, have an RA of 7, can manage 60mph and no heating supply.
When something is preserved, it still needs to earn its keep - so unless a preserved line happens to provide an income generating spur to a super-quarry or other heavy indusry and fancies supplying the traction - they are pretty much going to be a static exhibit.
I'd like a time machine and a huge, huge site so that the National Collection can house at least one (ideally two- one static, one working order) of every class ever to run in the UK- including prototypes, and even major sub classes and "iconic" coaching sets.