jingsmonty
Member
I think this isn't anything to do with this thread...
-
Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!
ScotRail HST Introduction - Updates & Discussion
- Thread starter Clansman
- Start date
- Status
I think this isn't anything to do with this thread...
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R
RailUK Forums
jingsmonty
Member
I think all the Northbound HST trains on the HML start in Edinburgh...I may be wrong about that though...
_toommm_
Established Member
Technical issues on the 13:57 from Aberdeen to Edinburgh. Dont think the powercars are functioning correctly as all non essential power isn't working at the moment...
EDIT: Cancelled
EDIT: Cancelled
Last edited:
Will the early departures from Glasgow to Inverness become HST operated in time?
chuff chuff
Member
- Joined
- 25 Sep 2018
- Messages
- 670
_toommm_
Established Member
chuff chuff
Member
- Joined
- 25 Sep 2018
- Messages
- 670
Okay thank you.
I don't recall - I know the HST Mk3 coaches use 415V three-phase AC, but how is it generated? Is it tapped off the traction current or is there a separate generator? Thanks.
43096
On Moderation
- Joined
- 23 Nov 2015
- Messages
- 18,848
Off the auxiliary alternator.
Highlandspring
Established Member
- Joined
- 14 Oct 2017
- Messages
- 2,777
It was a brake/air pressure fault, nothing wrong with the train supply.
jingsmonty
Member
I would assume so...even if it's a bit further on & the entire Inter7City network is fully HST operated (whenever that will be).
Highland37
Established Member
- Joined
- 29 Jun 2012
- Messages
- 1,259
2050? Any idea when the second set will see service and if the third set has been seen from the Wabtec timewarp?
43096
On Moderation
- Joined
- 23 Nov 2015
- Messages
- 18,848
Is 2050 the year when you stop the tedious comments about them?
Given that more vehicles have gone in, that would suggest the next set is not far off.
Highland37
Established Member
- Joined
- 29 Jun 2012
- Messages
- 1,259
No. When a company performs so badly and there are direct impacts on public services, the users are right to point out the low quality nature of that company's service.
History doesn't support your assertion. The relationship between numbers of vehicles arriving at Wabtec is not proportional to the timing of the delivery of the sets.
BRX
Established Member
- Joined
- 20 Oct 2008
- Messages
- 4,519
The delivery speed is also not proportional to the amount of repetitive statements about it on this thread...
Highland37
Established Member
- Joined
- 29 Jun 2012
- Messages
- 1,259
No but since we are talking about the delivery of 26 units which are the same, the conversation is by its very nature, repetitive. There are 193 pages of content talking about one thing - the HSTs.
Goldromans
Member
- Joined
- 11 Feb 2017
- Messages
- 222
This pathetic argument is utterly unnecessary. We’ve been told the next few sets aren’t far off, so asking for any update on this is hardly unreasonable.
If someone asks something you don’t know that answer to, do politely stay quiet and let anyone that might be able to post a helpful reply do just that.
On a different note, is there any update on when we might start seeing refurbished sets running to Inverness? After the second set it put into public service, or are there further issues to contend with?
If someone asks something you don’t know that answer to, do politely stay quiet and let anyone that might be able to post a helpful reply do just that.
On a different note, is there any update on when we might start seeing refurbished sets running to Inverness? After the second set it put into public service, or are there further issues to contend with?
Esker-pades
Established Member
As far as I know, Inverness crews haven't had training for refurbished HST sets (@jingsmonty can confirm). That doesn't mean that the second set couldn't run there, but it does place limitations on what services it could run. I don't know exactly how Highland Main Line turns are crewed , but it isn't an even split; Inverness crews run more HML turns than Perth. You'd have to find a diagram that was crewed by Perth staff both ways.
Bassman
Member
- Joined
- 14 Dec 2018
- Messages
- 79
Rail Magazine Issue 871 reports that a third refurbished set is about to be released, with the next four sets not far behind.
They also report that Scotrail has told them that they expect all 26 refurbished set to be in traffic by the end of the year.
They also report that Scotrail has told them that they expect all 26 refurbished set to be in traffic by the end of the year.
I would be pleasantly surprised by seven sets for seven cities as an Easter gift.
chuff chuff
Member
- Joined
- 25 Sep 2018
- Messages
- 670
Well that's what wabtec have told scotrail.
Wabtec have announced HST production also moving to Kilmarnock this morning.
https://twitter.com/wabtecuk/status/1091247166176268288?s=19
https://twitter.com/wabtecuk/status/1091247166176268288?s=19
chuff chuff
Member
- Joined
- 25 Sep 2018
- Messages
- 670
Trainfan061193
Member
- Joined
- 29 Sep 2018
- Messages
- 435
Hopefully with this announcement, things will finally start to speed up!
twpsaesneg
Member
- Joined
- 21 Jul 2009
- Messages
- 480
Link not working for me - though I found it using https://twitter.com/wabtecuk/status/1091270151071240193 instead.
They do though need to fill 100 positions to make this move according to the tweet... I hope that they can attract the people with the experience needed for this, better than they seem to have managed at Doncaster.
Some of the ex-shipyard guys will need to get used to welding steel that is paper thin instead of what they're normally used to!
They do though need to fill 100 positions to make this move according to the tweet... I hope that they can attract the people with the experience needed for this, better than they seem to have managed at Doncaster.
Some of the ex-shipyard guys will need to get used to welding steel that is paper thin instead of what they're normally used to!
I just hope that skilled people aren't put off by the limited duration of the project.
It says "secure and create", which means a combination of existing staff (i.e. whose jobs are now "secure" for the duration of the work) and new hires.
I can confirm this refurbed unit Will not be seen in Inverness until the works to the sidings are complete. It may pop up on a driver training run but won't be passengers on it to and from inverness until the works are done
jingsmonty
Member
That's correct - no 'Refurb' training has taken place in Inverness yet. There is currently nowhere to stable a spare HST set at the moment. Only thing I can see happening is that 'Refurb 3' will be swapped with the current 'classic' training train set (which does get used for passenger trains too) when it's released. That's just a personal guess/shot in the dark on my part! I believe this is fairly close now (followed not far behind by sets 4-7, with sets 8 & 9 having entered Wabtec).
hI think us Drivers had an extra Perth turn as of December (due to the 'Classic' sets being introduced) - we gained the 12.55 South, for one. I believe the 2nd refurbished set is used for training (static, or mobile, I'm not 100% sure) - I did hear that Perth has a specific path for a training train on the HML (which I haven't actually seen yet!) - how far North this goes, I'm not sure of either.
- Status