You are on the money - the conditions for rails in Britain are by no means extreme
Of course it is extreme, it very rarely gets this hot.
Your long winded comparison with Australia isn't really relevant.
You are on the money - the conditions for rails in Britain are by no means extreme
It's extreme for the UK. The temperature today is expected to be the highest for a decade. Some rail temperatures were already over 50 yesterday, and will get higher today.
Those comparing our railways with continental Europe are really comparing apples and oranges. For starters, their railways are run as a public service rather than to line pockets of shareholders, ergo, they are considerably more safer and well-designed to cope with all weather conditions.
Wow that's one hell of a statement to make! Considering the huge train crashes that have happened in France and Spain! By the way National Express have just won the contract to run trains in Germany.
I'd sure like to see the Australian railway system cope when it snows!You are on the money - the conditions for rails in Britain are by no means extreme, and rail-related problems kicking in when the temperature is only in the low 30s should be regarded as unacceptable.
I live in South Australia, one of those other places where the conditions for the rails are much tougher. After a lengthy period of track rebuilding, our suburban network is now at the point where we don't get rail-related disruption even when the maximum temperature is into the mid 40s. When things do start going wrong, in general the problems we do get are equipment failures rather than issues with the rails.
In addition to those high air temperatures, the rails are getting heated from above by intense sunlight which is far more direct than anywhere in Britain would ever experience (hot temperatures in Britain are caused by pockets of warm air, not by the sun) and they still need to be rated down to -10 degrees for the winter minimum temperatures which can be very cold in certain parts of the Outback (the surface of a desert radiates away its heat much faster than the ground in a maritime-dominated climate like Britain). Rails will heat and cool by over 50 degrees in a single day out there.
It would seem that the British need to look at adjusting their use of CWR to account for a slightly higher range of temperatures. If they can get it to the same sort of range as Australian tracks which work with slightly milder minimums and significantly hotter maximums, it should then be as simple as getting the neutral temperature right during installation.
Of course it is extreme, it very rarely gets this hot.
Your long winded comparison with Australia isn't really relevant.
Of course they are:Those comparing our railways with continental Europe are really comparing apples and oranges. For starters, their railways are run as a public service rather than to line pockets of shareholders, ergo, they are considerably more safer and well-designed to cope with all weather conditions.
Regional trains have been cancelled in North Rhine-Westphalia since 11 am, while Lower Saxony and Bavaria have seen rail service completely wiped out on Tuesday afternoon.
Train have also been asked to cut their speed. The RFF, which is responsible for the tracks across France, has asked SNCF to reduce speeds because of the heat expanding the rails and affecting overhead cables. Trains in Ile-de-France, Picardie and Pays de la Loire are affected, with TGVs yesterday limited to 240kph from 300kph and TERs and RER trains reduced to 40kph. - See more at: http://www.connexionfrance.com/Heat...-14890-view-article.html#sthash.8rfJ2Stx.dpuf
You are on the money - the conditions for rails in Britain are by no means extreme, and rail-related problems kicking in when the temperature is only in the low 30s should be regarded as unacceptable.
Of course they are:
Storms in Germany - http://www.thelocal.de/20150331/storm-shuts-down-nrw-train-lines
Heat in France - http://www.connexionfrance.com/Heatwave-pollution-Paris-ozone-14890-view-article.html
That's an interesting question. Does anyone know the answer?Reading the various route speed restrictions, why is VTEC affected between King's Cross and Leeds, but not VTWC?
And how is LM affected by speed restrictions but not, apparently, VTWC?
Are there technical reasons for the WCML being affected less than the ECML (though there are "overhead line problems")?
Or is it just the different TOC PR systems treating the problem differently?
Chiltern also seems to be completely unaffected.
I think some people need read up on how stressing and rail head temps work!
That's an interesting question. Does anyone know the answer?.
For the second day in a row, the Quarry Line (Stoats Nest Jn-Earlswood N Jn) is having intermittent problems. I'm not sure if today's issues are due to heat, but there were speed restrictions on the route yesterday.
NR tweeting showing two images of the buckling which occurred yesterday:
https://twitter.com/networkrailPR/status/616186396747911168
i love the twitter feeds on the TOC twitter accounts which remind people to carry a bottle of water with them when travelling. thanks for stating the bloody obvious!
i love the twitter feeds on the TOC twitter accounts which remind people to carry a bottle of water with them when travelling. thanks for stating the bloody obvious!
i love the twitter feeds on the TOC twitter accounts which remind people to carry a bottle of water with them when travelling. thanks for stating the bloody obvious!
i love the twitter feeds on the TOC twitter accounts which remind people to carry a bottle of water with them when travelling. thanks for stating the bloody obvious!
The reason it is not obvious is because it is not instinctive.If it's that obvious, then why do people forget to do it, and subsequently fall ill and cause horrendous delays? Subsequently it's not that obvious, and the sheep need reminding![]()
I don't know for sure, but West Coast has been renewed more recently compared to the ECML - Newer sleepers (G44s) are heavier than older sleepers (F40s, F27s), spacing of sleepers is 650mm rather than 710mm, newer cleaner ballast, heaped ballast shoulders, stiffer and heavier rail section (CEN60 rather than CEN56) all add up to a greater lateral resistance to buckling.
The amount of First Aid calls we get for people who pass out or faint, and it transpires that they simply haven't eaten or drunk anything, would lead me to suggest that plenty of people are not aware of the bloody obvious.
Sorry, I was unaware that you were an expert in Permanent Way Engineering. What should they have done instead then?What, like NR were aware of the heatwave forecast days in advance yet all they could come up with was this contingency plan of speed restrictions?
What, like NR were aware of the heatwave forecast days in advance yet all they could come up with was this contingency plan of speed restrictions?