SWTH
Member
It is my understanding that a Vario with tacho/boot etc (and no standees) would be certified as a coach and issued with an appropriate Schedule 3 certificate. I know of two 53 plate Varios that we used to operate that were as such. They can still be used on local bus service work until 2020 by the current owners.
This might help further
http://www.legislation.gov.uk/uksi/2000/1970/note/made?view=plain
Thanks for the link, here is a quote from it:
2. Regulation 3 applies the requirements of these Schedules to the various types of public service vehicle according to the date when they are first used. New buses weighing more than 7.5 tonnes and new double-deck buses must comply with both Schedules 1 and 2 from 31 December 2000 and all such buses which are in use must meet these requirements after 2016 and 2017. New buses weighing 7.5 tonnes or less and new coaches must from 31 December 2000 comply with Schedules 2 or 3 respectively until 1 January 2005, after which new vehicles of these kinds must also comply with Schedule 1. All these regulated public service vehicles must meet the wheelchair accessibility requirements and those of the appropriate general accessibility requirements if in use after 1 January 2015 (for buses weighing 7.5 tonnes or less) or 2020 (for coaches). There is an exception in the case of regulated public service vehicles that are manufactured before 1 October 2000 and 1 October 2004; they are not required to comply with the requirements of the relevant Schedules unless and until they are in use on or after 1 January in either 2015 or 2016 or 2017 or 2020 as appropriate.
Again, just like the legislation document, there is no weight definition for a coach, therefore my understanding is that a coach-spec Vario (i.e no standing allowed) is allowed to be used on service work until 2020. If they are classed legally as a coach, then they can be used. A Vario specified as a bus (i.e has standing capacity) cannot now be used on registered service work.