• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Signalling systems on Northern routes

Status
Not open for further replies.

Driver068

Member
Joined
20 Feb 2014
Messages
666
I am in the early stages of looking into the whole signalling system covered by Northern Rail out of Newcastle. I am looking for information from what signal boxes cover what signals and if they are semaphore or light systems. I understand Tyneside cover upto south of Sunderland where RG take control then NS. Where may I get this information if available and also what signals are covered through to Darlington.
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

142094

Established Member
Joined
7 Nov 2009
Messages
8,789
Location
Newcastle
IIRC Tyneside goes upto Blaydon box on the Tyne Valley line, Ryhope Grange on the Durham Coast, Heighington on the Bishop Auckland line, Newsham on Blyth and Tyne, Morpeth on the ECML, and Bowesfield on Darlington to Middlesbrough. South of Darlington it changes to York IECC. Urlay Nook I think is now a crossing box, but it used to control sections as well.

On the Stillington branch it is probably Ferryhill if this box is still in use.

Tyneside has a number of workstations which cover the various areas e.g. Sunderland, Newcastle, Darlington.
 

MarkyT

Established Member
Joined
20 May 2012
Messages
7,575
Location
Torbay
Network Rail's London North Eastern Route Sectional Appendix details the controlling signalboxes or control centres for each route section next to the track diagram in Section A. it's a large and unwieldy document and quite difficult to find your way around. Table A is split into a number of different sections throughout the book. The north east branches are covered in the final section towards the end, starting at p839 in the pdf, but the main line is in a different section, starting at p295.

http://www.networkrail.co.uk/browse...x/london north eastern sectional appendix.pdf

Table A shows the method of working e.g. AB or TCB but doesn't indicate where semaphores are used as opposed to colour lights. Many mechacical boxes have colour lights in entirety or just for some signals.
 

Driver068

Member
Joined
20 Feb 2014
Messages
666
IIRC Tyneside goes upto Blaydon box on the Tyne Valley line, Ryhope Grange on the Durham Coast, Heighington on the Bishop Auckland line, Newsham on Blyth and Tyne, Morpeth on the ECML, and Bowesfield on Darlington to Middlesbrough. South of Darlington it changes to York IECC. Urlay Nook I think is now a crossing box, but it used to control sections as well.

On the Stillington branch it is probably Ferryhill if this box is still in use.

Tyneside has a number of workstations which cover the various areas e.g. Sunderland, Newcastle, Darlington.

Thanks for that, is there anywhere I can get this information for myself and see in more detail
 

30907

Veteran Member
Joined
30 Sep 2012
Messages
21,959
Location
Airedale
The relevant Trackmaps book shows the control area of each box at publication.
 
Status
Not open for further replies.

Top