londonmidland
Established Member
I am new to OpenBVE and I dont know the controls, can somebody please help:cry:. Can you tell me how to start and move a Class 323, I have looked at the controls in the menu but I still don't get it..
-
Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!
OpenBVE Controls HELP!
- Thread starter londonmidland
- Start date
- Status
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R
RailUK Forums
Lukespenceruk1
Member
- Joined
- 4 May 2009
- Messages
- 275
Press forward the back then insert
hold 2 until pantograph rises
press forward again then press space
close doors and go.
hold 2 until pantograph rises
press forward again then press space
close doors and go.
londonmidland
Established Member
Aren't these for BVE4? I want OpenBVE controls
BVE4 and OpenBVE controls are in some ways quite similar - rather than listing them all I will post a link to the guide here.
Generally though with some of the trains, you do need to put the reverser into a state then to neutral and reset the AWS before you can release the brakes and take power. On the likes of X City, I don't think you need to reset the pantograph.
--- old post above --- --- new post below ---
The only way that I am aware of is to hit "Esc" and go to "Jump to Station" - where a change of ends is required, you will find a station call called something like "CHANGE ENDS" which needs to be selected
Generally though with some of the trains, you do need to put the reverser into a state then to neutral and reset the AWS before you can release the brakes and take power. On the likes of X City, I don't think you need to reset the pantograph.
--- old post above --- --- new post below ---
The only way that I am aware of is to hit "Esc" and go to "Jump to Station" - where a change of ends is required, you will find a station call called something like "CHANGE ENDS" which needs to be selected
T163R
Member
You need to press F and then V (Front, Neutral), wait for the long alarm sound to press INSERT (AWS cancel), then press 2 (Pantograph Up), wait a little moment, and then press F (Front), close the doors and you're ready to go 
londonmidland
Established Member
You need to press F and then V (Front, Neutral), wait for the long alarm sound to press INSERT (AWS cancel), then press 2 (Pantograph Up), wait a little moment, and then press F (Front), close the doors and you're ready to go
Thanks
T163R
Member
You're welcome 
- Status