• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Jointed track & restrictions

Status
Not open for further replies.

emoaconr

Member
Joined
20 Apr 2009
Messages
333
Location
Merseyside
Just an enquiry!
How much does the usage of jointed track affect the speed, and type of trains that can ride upon it?

I know my local line, Borderlands line, is primarily still jointed, which took 142's off it a good few years back, because of their rickety-racketyness which was intensified by having jointed track. Does it also reduce the speed limit, however?
 
Last edited:
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

TDK

Established Member
Joined
19 Apr 2008
Messages
4,164
Location
Crewe
Just an enquiry!
How much does the usage of jointed track affect the speed, and type of trains that can ride upon it?

I know my local line, Borderlands line, is primarily still jointed, which took 142's off it a good few years back, because of their rickety-racketyness which was intensified by having jointed track! Does it also reduce the speed limit, however?

The track between Shrewsbury and Chester is jointed in quite a few spots and the speed is 70 for sprinters/MU and 60 for eveything else
 

507 001

Established Member
Joined
3 Dec 2008
Messages
2,173
Location
Huyton
I dont think it generally effects the speed limits on the lines where it is still used(because the linepeeds are generally low enough), however I think if it were in use on the WCML or ECML for example then it probably would make a considerable difference to linespeeds, you wouldn't want to be doing 100-125 on jointed track!
 

route:oxford

Established Member
Joined
1 Nov 2008
Messages
4,949
I dont think it generally effects the speed limits on the lines where it is still used(because the linepeeds are generally low enough), however I think if it were in use on the WCML or ECML for example then it probably would make a considerable difference to linespeeds, you wouldn't want to be doing 100-125 on jointed track!

When Mallard set the world record for speed, wouldn't it have been on jointed track?

Likewise she took regular runs at 100mph+ wouldn't it also have been generally on jointed track?
 

The Snap

Established Member
Joined
10 Jun 2005
Messages
3,156
When Mallard set the world record for speed, wouldn't it have been on jointed track?

Likewise she took regular runs at 100mph+ wouldn't it also have been generally on jointed track?

Her wheels must have been knackered! :|
 

chappers

Member
Joined
5 Mar 2008
Messages
76
If the joints are permanent i.e fishplated then I'm not aware if there is an upper restriction or not, although the fact that it is still jointed would indicate its not a major route and probably wouldn't have a high linespeed anyway.

A temporary joint (i.e clamped with fasetta clamps) is limited to 50mph (20mph if the gap opens more than 10mm), and must be removed from CWR within 21days.
 
Status
Not open for further replies.

Top