• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

HDMI Cable Splitter

Status
Not open for further replies.

dangie

On Moderation
Joined
4 May 2011
Messages
2,353
Location
Rugeley Staffordshire
My television has four HDMI rear sockets. All are in use. I wish to connect an additional HDMI device. I could swop over cables each time I want to use different devices but apart from the inconvenience I don’t think it would do the television much good.

I’ve seen HDMI Splitter’s advertised. One HDMI into three. Has anyone used them, and are they any good. I’ve attached a link to show what I mean. Thank you.
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

david1212

Established Member
Joined
9 Apr 2020
Messages
1,754
Location
Midlands
Several years ago I bought a simple cheap module similar to this which works fine. 99% just 1080P but now would buy 4K.
If only one connected item is powered it mostly selects this automatically. If more than one then have to push the button.
It is powered from TV and/or the source item.

https://www.ebay.co.uk/itm/165820278710

Something like this looks to need power. A USB lead is included, if TV has a spare USB port I presume this can be used.

https://www.ebay.co.uk/itm/226580198870
 

najaB

Veteran Member
Joined
28 Aug 2011
Messages
33,589
Location
Scotland
Something like this looks to need power. A USB lead is included, if TV has a spare USB port I presume this can be used.
Though, keep in mind that some USB ports on TVs provide limited power so it may or may not work.
 

AM9

Veteran Member
Joined
13 May 2014
Messages
16,012
Location
St Albans
Several years ago I bought a simple cheap module similar to this which works fine. 99% just 1080P but now would buy 4K.
If only one connected item is powered it mostly selects this automatically. If more than one then have to push the button.
It is powered from TV and/or the source item.

https://www.ebay.co.uk/itm/165820278710

Something like this looks to need power. A USB lead is included, if TV has a spare USB port I presume this can be used.

https://www.ebay.co.uk/itm/226580198870
The orginal spec for HDMI devices requires them to output a nominal 5V DC (+/- 0.3V) 50mA to power otherwise passive switching units. HDMI 2.1 specs raise the current to 300mA to include high speed cables with built0-in amplifiers.
 

D365

Veteran Member
Joined
29 Jun 2012
Messages
13,157
I assume the model is superceded but I'm using one of these to auto switch between a DVD player and a Roku stick...

UGREEN is my first port of call for HDMI and USB-C hubs. In contrast to the ‘no-name’ brands on amazon and eBay, I don’t recall ever going wrong.
 
Status
Not open for further replies.

Top