• Our new ticketing site is now live! Using either this or the original site (both powered by TrainSplit) helps support the running of the forum with every ticket purchase! Find out more and ask any questions/give us feedback in this thread!

Class 31s - the good & bad

Status
Not open for further replies.

alexl92

Established Member
Joined
12 Oct 2014
Messages
2,368
I often hear people being quite critical about Class 31s diesels - the most common criticism is ‘Couldn’t pull the skin off a rice pudding’. But they have been one of the longest-lived classes on the network, surviving with Network Rail until just a few years ago. Are they really as terrible as everyone makes out? Surely they must have been ok to be kept on so long?
 
Sponsor Post - registered members do not see these adverts; click here to register, or click here to log in
R

RailUK Forums

Shaw S Hunter

Established Member
Joined
21 Apr 2016
Messages
3,486
Location
Over The Hill
Compared to the Bo-Bo Type 2s the 31s were getting on for 50% heavier but with only 18% extra power. That inevitably meant their performance compared poorly. However the EE 12SVT engine they were eventually fitted with was a de-rated version of that fitted to the even longer lived 37s, hardly surprising that they lasted well with such a de-stressed rugged engine.
 

gazthomas

Established Member
Joined
5 Jun 2011
Messages
3,466
Location
Llandudno
They were pants, if reliable. Hey, let's add ETH to an already under powered loco. Diamond
 

61653 HTAFC

Veteran Member
Joined
18 Dec 2012
Messages
19,350
Location
Yorkshire
They looked cool too.
Really? Of all the several nicknames they were given by enthusiasts over the years, Gargoyles* (or simply 'goyles) was the most appropriate.

*=technically, "Grotesques" would've been more accurate, as they didn't have water spouts designed into their faces!
 

Kneedown

Established Member
Joined
29 Dec 2007
Messages
1,837
Location
Nottinghamshire
We had to stop putting them on engineering trains that involved working in tunnels due to the excessive fumes they put out.
 

DidcotDickie

Member
Joined
12 Mar 2017
Messages
160
Location
Oxfordshire
They were (usually) slow, though it depended on what duty they were on. My first run behind a Brush 2 was around 1960 from Upminster to Thorpe Bay on the LT&S where they were drafted in to replace the increasingly knackered steam locos. I seem to recall that performance on the 10 coach ex-LNER/BR non-corridor stock was quite sprightly compared to steam.

In the 1970s I occasionally travelled from Loughborough to Cambridge which was normally DMU. Some of the later runs comprised a 31 and 6 mark 1s from Leicester to Cambridge and vv and they were fine on that. Infinitely better than the purgatory of a Cravens class 105 from Peterborough. I also did a few runs from Moorgate over the widened lines to Welwyn GC around the same time (BR mark 1 non-corridor stock) and they were fine on that too.

Where they were less well suited was on class 1 express services which were normally diagrammed for a class 47 or similar. The Harwich Boat Trains from Liverpool St in the 70s usually got a class 37 which was noisy but got you there. Some of the Prinz Lines boat trains for the Harwich - Hamburg ferry ended up with a 31 on 12 mark 1s which meant that you were down to walking pace by the top of Brentwood Bank
 

randyrippley

Established Member
Joined
21 Feb 2016
Messages
5,382
presumably they were OK on their East Anglian / East coast original homeland, where there are no real hills..........once they moved to the Western as Hymek replacements the lack of power became obvious.
 

DarloRich

Veteran Member
Joined
12 Oct 2010
Messages
32,909
Location
Fenny Stratford
I assume they survived long on test trains as they were almost go anywhere and were available!
 
Last edited:

TheEdge

Established Member
Joined
29 Nov 2012
Messages
4,498
Location
Norwich
presumably they were OK on their East Anglian / East coast original homeland, where there are no real hills..........once they moved to the Western as Hymek replacements the lack of power became obvious.

Apart from most of the GEML north of Ipswich. And the East Suffolk Line. And the notoriously steep and sustained Brentwood Bank. Brentwood Bank is so flat I've known GA 90s to sometimes start to tail off... ;)
 

Pigeon

Member
Joined
8 Apr 2015
Messages
1,123
They were pants, if reliable. Hey, let's add ETH to an already under powered loco. Diamond

Not just any ETH, but massive ETH, with an index of 66, which was about a third of the total power output. Chug chug trundle trundle.

I've also read that the ETH conversion was something of a crude bodge, and at least in some implementations meant that that power wasn't available for traction even with the ETH off. Can't remember where though, and trying to re-excavate the reference reveals only the falsity of the claims that the internet "puts all human knowledge within instant reach".
 

randyrippley

Established Member
Joined
21 Feb 2016
Messages
5,382
Apart from most of the GEML north of Ipswich. And the East Suffolk Line. And the notoriously steep and sustained Brentwood Bank. Brentwood Bank is so flat I've known GA 90s to sometimes start to tail off... ;)


But they're not real hills compared with Devon, Cornwall, Wales...........
you East Anglians don't know what a hill is..............
 

randyrippley

Established Member
Joined
21 Feb 2016
Messages
5,382
Not just any ETH, but massive ETH, with an index of 66, which was about a third of the total power output. Chug chug trundle trundle.

I've also read that the ETH conversion was something of a crude bodge, and at least in some implementations meant that that power wasn't available for traction even with the ETH off. Can't remember where though, and trying to re-excavate the reference reveals only the falsity of the claims that the internet "puts all human knowledge within instant reach".

that comes from the Wikipedia entry for the class 31, and I don't think there's a proper source for the comment
 

TheEdge

Established Member
Joined
29 Nov 2012
Messages
4,498
Location
Norwich
But they're not real hills compared with Devon, Cornwall, Wales...........
you East Anglians don't know what a hill is..............

I'm a part Welshman, who grew up in Marches living in Anglia. I know a hill when I see it ;)
 

dk1

Veteran Member
Joined
2 Oct 2009
Messages
19,846
Location
East Anglia
31s where awful things on portion workings to/from Yarmouth especially on a stopping load 11. Getting up the bank to/from Lingwood was particularly painful. All wind & piss was how I referred to them as a child.
 

Bunting14

Member
Joined
9 Nov 2010
Messages
39
I understand that it was a choice between them and the class 25s for withdrawal in the 80s. What were the deciding factors?
 

Pigeon

Member
Joined
8 Apr 2015
Messages
1,123
that comes from the Wikipedia entry for the class 31, and I don't think there's a proper source for the comment

No, it doesn't. The reason there isn't a proper source is that I can't remember where it did come from.
 

dk1

Veteran Member
Joined
2 Oct 2009
Messages
19,846
Location
East Anglia
But they're not real hills compared with Devon, Cornwall, Wales...........
you East Anglians don't know what a hill is..............

Chris Evans was made to look very very silly when he made a similar comment reguarding Norwich which he insisted was flat :rolleyes:
 

randyrippley

Established Member
Joined
21 Feb 2016
Messages
5,382
I understand that it was a choice between them and the class 25s for withdrawal in the 80s. What were the deciding factors?

Sulzer reliability and lack of spares - Vickers had shut the production line at Barrow, and European parts were incompatible.
 

306024

Established Member
Joined
23 Jan 2013
Messages
3,974
Location
East Anglia
My old boss refers to the Ipswich - Peterborough line as going over the Alps. A touch or irony perhaps but while East Anglia may be relatively flat, the railways were built on the cheap, as the land lies in many cases, so gradients are steeper than you would think. Only read this evening that Stephenson reckoned a 1 in 300 gradient would need double the pulling power back in the day.

So class 31s, useful workhorses if you didn't want to get anywhere quickly. Recall a pair of toffee apples (31/0s) spending a few days on the Norwich's once during a motive power shortage at Stratford. Eventually a pair were found that when multipled up both actually went in the same direction.
 
Last edited:

D5645

Member
Joined
1 Oct 2016
Messages
61
Location
Ripley, Derbyshire
No, it doesn't. The reason there isn't a proper source is that I can't remember where it did come from.

The entry in Wikipedia is rubbish.

A 31/4 produces the same output as a 31/1 when the ETH is switched off. The only difference between the two is a 31/4 has a modifed Woodward governor and idles at higher rpm.

I suspect that is where the nonsense comment on Wikipedia originated from.
 

D5645

Member
Joined
1 Oct 2016
Messages
61
Location
Ripley, Derbyshire
presumably they were OK on their East Anglian / East coast original homeland, where there are no real hills..........once they moved to the Western as Hymek replacements the lack of power became obvious.

Trying to replace Hymeks with 31's was very optimistic. I think there was little other choice as there were no spare Type 3's available.

31's also replaced Class 22's on the WR which they easily outperformed.
 

Railperf

Established Member
Joined
30 Oct 2017
Messages
3,683
Apart from most of the GEML north of Ipswich. And the East Suffolk Line. And the notoriously steep and sustained Brentwood Bank. Brentwood Bank is so flat I've known GA 90s to sometimes start to tail off... ;)
Most of my runs up Brentwood bank see the Class 90 driver coasting to dissipate allowed for recovery time of up to 2 minutes - to avoid passing Shenfield early - plus there is a 75mph limit through the station - which means the train has to reduce speed from the 90mph limit. Sometimes a late running Southend stopper ahead means drivers might see caution signals going up the bank too. And i've lost count of the amount of times there have been TSR's of 50 and 60mph over the older paintwork due to its bad condition.
 

306024

Established Member
Joined
23 Jan 2013
Messages
3,974
Location
East Anglia
Most of my runs up Brentwood bank see the Class 90 driver coasting to dissipate allowed for recovery time of up to 2 minutes - to avoid passing Shenfield early - plus there is a 75mph limit through the station - which means the train has to reduce speed from the 90mph limit. Sometimes a late running Southend stopper ahead means drivers might see caution signals going up the bank too. And i've lost count of the amount of times there have been TSR's of 50 and 60mph over the older paintwork due to its bad condition.

Just [1] minute approaching Shenfield these days, and both Gidea Park Jn and nearly the whole layout at Shenfield have been renewed recently so no TSRs. In particular the Southends get a faster run into pfm 4 at Shenfield so the xx.55 from Liv St is more likely to clear ahead of the xx.00 Norwich.

If on time through Gidea Park many drivers shut off power up Brentwood bank at the right spot to get through Shenfield at line speed without touching the brake. Not advisable with a 31.
 

Railperf

Established Member
Joined
30 Oct 2017
Messages
3,683
Just [1] minute approaching Shenfield these days, and both Gidea Park Jn and nearly the whole layout at Shenfield have been renewed recently so no TSRs. In particular the Southends get a faster run into pfm 4 at Shenfield so the xx.55 from Liv St is more likely to clear ahead of the xx.00 Norwich.

If on time through Gidea Park many drivers shut off power up Brentwood bank at the right spot to get through Shenfield at line speed without touching the brake. Not advisable with a 31.
Yes, the 31 would probably be going backwards halfway up the bank LOL.:D
 
Status
Not open for further replies.

Top