How many ran around as 3 car made up of a 2 car unit with a Driving car from another set attached. Does this still happen? One of the things a southerner like me found odd when i travelled up north!
All of GWR's fleet! With the exceptions on 798 and their two remaining two car sets. Hence the 158/9 numbering.
Agreed entirely.
I never found CT that bad, reality is in CT days one often got a 3-car train on many of the longer distance routes, on many occasions a 158 or 170. Now many routes where you could get a 170 in CT days now have 158s, or in some cases 153s. Personally I'd have preferred a focus on making CT work, rather than breaking it up. As you say, the lack of flexibility in the fleets really shows now.
So BR had plans to reopen East-West rail way back then, and we are still waiting for the western section over 25 years later?General strengthening and cascading, plus a number for Oxford - Bletchley - Bedford - Corby - Peterborough - Cambridge.
So BR had plans to reopen East-West rail way back then, and we are still waiting for the western section over 25 years later?
The flipside of that was that what you'd get was pretty random, often including a 150 on the sort of long-distance working that otherwise might actually attract business travellers.
All of GWR's fleet! With the exceptions on 798 and their two remaining two car sets. Hence the 158/9 numbering.
Before TPE got their 185's the 158's that they were using often were hybrids but as far as I can remember, these were in the 158/7 range and not in the 158/9 range.
Wouuld be interesting what the numbers were.
Digging up an old thread here!
Out of curiosity have any engine mismatches occurred with the swapping around of the centre cars?
Example, is there a 3 car set with a Perkins + Cummins (350hp) + Perkins.
Also any mismatches with the 2 variants of the Cummins engines?
Because in the late 80's, rail usage was falling and not many people if any could have seen modern usage.Why didn't they build them all as 3 car units instead of just the trans-pennine ones being 3 car?
Seems odd that apart from those converted to 159s one centre car is I be live with WM trains the rest being with NR. Why wm trains want just one 3 car unit i know not.
K
Sorry meant GW (158798). Post edited.WMT don't have *any* Class 158s.
I think this unit was meant to go to SWT who would have had nine 3-car 159/1s to replace nine 2-car 170/3s and then ten 2-car 158s for strengthening.Sorry meant GW (158798).
Thankou most interesting. Strange also northern finished up with one 400hp Cummins unit along with a mixture of Perkins and 350hp Cummins. Often wondered which engine is best.I think this unit was meant to go to SWT who would have had nine 3-car 159/1s to replace nine 2-car 170/3s and then ten 2-car 158s for strengthening.
However, FGW then swapped out its Perkins engined 158s for ex-TPX Cummins ones with the plan to split a third of their fleet and use the vehicles to have all 3-car units. But they would have been left with one 2-car unit so I believe a deal was done where they took one as built 3-car unit (158798) so they could run all services as 3-cars.
SWT thus got an extra 2-car unit giving them eight 159/1s and eleven 158s. Then the 2008 financial crisis hit and SWT didn't need as many 2-car units (I think the plan was at least one more ten-car 158-158-159-159 formation would have run in the morning peak). Hence one is now permanently with EMT.
Leaving aside which ROSCOs own which vehicles, it'd have made sense for some of the 400hp ones to have been the ones which became 159/1s even though it'd have meant some swapping around. Unless having 400hp driving cars with a 350hp centre car would've caused issues of course.Thankou most interesting. Strange also northern finished up with one 400hp Cummins unit along with a mixture of Perkins and 350hp Cummins. Often wondered which engine is best.
K
No, it would have made more sense for the 10 2-cars with 400hp engines (158863-872) to go to SWT rather than their 350hp 158s. There was a proposed ownership swap between Angel and Porterbrook to simplify ownership as well. Very sensible - but it was rejected by DfT.Leaving aside which ROSCOs own which vehicles, it'd have made sense for some of the 400hp ones to have been the ones which became 159/1s even though it'd have meant some swapping around. Unless having 400hp driving cars with a 350hp centre car would've caused issues of course.
Thankou most interesting. Strange also northern finished up with one 400hp Cummins unit along with a mixture of Perkins and 350hp Cummins. Often wondered which engine is best.
K
Yes I remember wondering at the time why all the 400hp ones didn't go to SWT. Should of guessed it was the Dft involved. A process which as an ex engineer I used to call "the unstoppable march of the clerks".No, it would have made more sense for the 10 2-cars with 400hp engines (158863-872) to go to SWT rather than their 350hp 158s. There was a proposed ownership swap between Angel and Porterbrook to simplify ownership as well. Very sensible - but it was rejected by DfT.
What an informative post...The same reasons as why there aren't 10 car Voyagers, 3 car 156s, 4 car 175s, 6 car 180s, 5 car 185s, 4 car 195s .......
IIRC at the time of the introduction of the 15x units, British Rail was funded to replace every 3 vehicles with 2, so what would have been a 3-car Class 126 (or insert 1st gen DMU of your choice) would have been replaced with a 2-car 15x unit. I'm assuming the same formula would have applied to LHCS as well, with Loco+5 formations being replaced with ~3-cars worth of sprinter.What an informative post...
It's easy to assume cost but that's usually not the underlying reason.
And you can't go blaming the SRA either...
My interpretation would be that the 'short' formations ordered are because traffic forecasts didn't find any justification for longer trains.What an informative post...
It's easy to assume cost but that's usually not the underlying reason.
And you can't go blaming the SRA either...