Really? It happens fairly frequently.Can't say I've ever seen them disable reservations specifically because of disruption. I have only really seen it happen when trains are out of position and, as part of the recovery, are getting turned around too quickly to allow them to download the reservations. It tended to happen a lot more back in the days of paper reservation tickets, for obvious reasons.
The overcrowding is there anyway, if they've had time to download the reservations it seems sensible to enforce them.
The time he arrives at the destination on his ticket is what counts. If he turns back (abandons journey ) he can claim a refund rather than delay repay.How does delay/repay work for a London-Manchester journey that is stopped short at Stockport? My son is on the 1953 arriving Stockport around now, as far as I can see there are no trains on to Manchester so he will need to get a bus or taxi. What delay banding does this fall into, it is largely on time at Stockport but clearly he is going to be very late and out of pocket getting into Manchester
There were buses arranged at Macclesfield, I'd assume the same might be arranged for Stockport?How does delay/repay work for a London-Manchester journey that is stopped short at Stockport? My son is on the 1953 arriving Stockport around now, as far as I can see there are no trains on to Manchester so he will need to get a bus or taxi. What delay banding does this fall into, it is largely on time at Stockport but clearly he is going to be very late and out of pocket getting into Manchester
Yes, left Piccadilly around 2248 as 0Z99.47 has just dragged the 390 onto Longsight, leaving the 20s at the stops.
The 47 will be heading back to collect the 20s provided it can do so before the possession is taken.
A breakdown train going to clear the line is always a class 1 train.Nice to see the 20s displaying express passenger headcode ie two white disks ! I doubt it was very express though.Did they show one central disk (light engines) from Crewe to Ardwick?
Cropped+reduced photo of the coupling used (my photo):With the 20s (1Z99) I assume they had to use emergency coupling which is limited 5MPH, is this correct?
Thank you, I should have remembered that from Ian Allan books in days of yor.A breakdown train going to clear the line is always a class 1 train.
I don't think the text has been updated as it still refers to using yesterday's tickets today.Looking at the latest from National Rail website their now stating disruption until the end of today so whether or not the plan now is to actually try and get the wires fixed today so work doesn't run through until weekend I'm not to sure.
It does seem looking at Tracksy that limited services are running via the through Platforms (13+14) all other platforms are currently blocked.
So what? In circumstances like this everyone has to step up, including passengers accepting that trains will be crowded.I'm guessing EMR trains won't have the spare capacity needed to accommodate extra passengers.
A breakdown train going to clear the line is always a class 1 train.
Specifically it should always be 1Z99: Extract from the North West & Central Timetable Planning Rules.Thank you, I should have remembered that from Ian Allan books in days of yor.![]()

I get your point, but if the already offered alternatives are working, I think it's sensible to try to avoid overcrowding to prevent people being left behind at Stations.So what? In circumstances like this everyone has to step up, including passengers accepting that trains will be crowded.
Forgive me if this strays off topic, but has 9 been updated? I ask as all our Thameslink services (I'm in Medway) are 9Pxx.Specifically it should always be 1Z99: Extract from the North West & Central Timetable Planning Rules.
View attachment 202490
Although I have seen 1Z98 used if two rescue units have been mobilised.
I was quoting from the TPRs as it was marginally easier to access.Forgive me if this strays off topic, but has 9 been updated? I ask as all our Thameslink services (I'm in Medway) are 9Pxx.
Edit: ignore that, I've just realised you're quoting from a regional rulebook. I must learn to read!
It's used on several routes to distinguish particular service groups that need special routing or priority from 'normal' class 1/2.Forgive me if this strays off topic, but has 9 been updated? I ask as all our Thameslink services (I'm in Medway) are 9Pxx.
It was also used for unfitted freight trains.It's used on several routes to distinguish particular service groups that need special routing or priority from 'normal' class 1/2.
Once it was used for local stopping freight trains but those no longer exist.
In East Anglia we get 9XXX for additional services during disruption, as well as the fast 9P19 service that runs non-stop between Ipswich and Stratford. There's a evening equivalent but I can never remember the headcode.The actual Rulebook wording for Class 9 is 'Class 373 train [or] other passenger train if specially authorised'. Class 9s now cover Class 374, Anglo-Scot via Birmingham, Transpennine, Thameslink, East London Line, and Crossrail (at least). There's probably others. At some point there should probably be a review because currently some classes are very rarely used and Class 9 includes Long-distance High-Speed and all-stations metro trains.
Quite possible. Plus EMR will likely be able to redeploy those crews elsewhere, whereas for TPE (in particular) they will likely be sat twiddling their thumbs as they don't sign anything else, and Northern are obviously the local stopping services.Possible the OLE problem has caused capacity issues that have meant not all trains can run, and it was better to cancel all of one operator for some reason?