I googled this. So is this to positively ID the vehicle and track it?RFID tag.
The primary use is for vehicle identification on lineside equipment such as WILD/HABD/wheelchex/gotcha.I googled this. So is this to positively ID the vehicle and track it?
It's quite a way above the railhead.RFID tag.
Why does the panchex have a pantograph?RFID tag was my first thought too, though I don't know for sure.
The Panchex equipment installed in the 1990s used an earlier and larger but otherwise similar RFID tag, fitted to electric stock at about passenger shoulder height below the pantograph. Even before that there was a larger still tag about the size and shape of a fruit cake bolted underneath HAA wagons as part of a scheme to track coal loads.
Today I am even more informed. It seems some routes are fitted with devices that monitor the wheel bearing harmonic frequency of passing vehicles. Each wheel bearing it seems has a unique harmonic frequency. As a vehicle passes such a detector it identifies the vehicle from the RFID and reads the harmonic frequency of the wheel bearings. Changes in harmonic frequency since the last reading indicates there has been wear in the bearing.
GOTCHA is certainly an impressive bit of kit. Siemens has a similar system (RailBAM) which knows when a Desiro is about to pass and listens to the axles and bearings, then feeds back the data to Siemens directly.That's an excellent proactive use of technology on the railway I'd not previously heard about at all. Thanks for sharing.
Panchex was (I think it's now superseded by something more modern) a piece of equipment fitted to the overhead line to monitor the pantographs of passing trains, and didn't itself have a pantograph. The RFID tag was fitted to teh trains using the route, and allowed it to include the loco/unit number when it detected a fault.Why does the panchex have a pantograph?