hexagon789
Veteran Member
It would be ironic if the main line electrics can use Sprinter differentials but the branch line bi-modes can't.
Hopefully it doesn't come to that.
It would be ironic if the main line electrics can use Sprinter differentials but the branch line bi-modes can't.
Yes, massively. It’s on the list of bid promises that don’t match reality...Is there doubt that they will be then?
The power pack has 2 bogies on the UK version though, which should reduce axle load. And Flirts are fairly light machines to boot (major weight is either by the cabs which have their own bogies, or in the power pack with 2 bogies).Indeed, although the extra axle load isn't as much as you might expect because (1) the body sections are usually a bit shorter therefore lighter than normal coaches, and (2) having fewer bogies the total train weight is also less than a conventional train of the same length.
I suspect any problem with differentials for the Flirts will be more about the axle loading of the "power pack", which carries the the diesel engine and associated kit and also has a body module hung off each end, although I don't think it has traction motors. It would be ironic if the main line electrics can use Sprinter differentials but the branch line bi-modes can't.
Well, it would be a bit of mis-selling otherwise, that "L" is for "Light" (or "Leichter" originally)And Flirts are fairly light machines to boot.
Yes, massively. It’s on the list of bid promises that don’t match reality...
It would be ironic if the main line electrics can use Sprinter differentials but the branch line bi-modes can't.
It wouldn't be ironic, there are a lot of Sprinter differentials across the AGA rural network, Norwich - Cambridge and Norwich - Sheringham spring to mind, so seriously problematic is the term you are looking for.
How significant are the differentials? Can it be that, like say the heavyweight Class 185s that also can't use Sprinter differentials, the fact that FLIRTs accelerate like the proverbial off a shovel may actually make up all the time on a stopping branch line service?
Nippy indeed..as fast as a 345 to 60mph. Isnt the sprjnter differential also down to braking capability as well as weight?Norwich-Cambridge is 75 max without differentials, 90 with & the Cromer/Sheringham line is 55/75 without/with SP speeds, it really depends as you say how quick the Flirts are from a stand. The electric ones on the continent are pretty nippy indeed.
Norwich-Cambridge is 75 max without differentials, 90 with & the Cromer/Sheringham line is 55/75 without/with SP speeds, it really depends as you say how quick the Flirts are from a stand. The electric ones on the continent are pretty nippy indeed.
Nippy indeed..as fast as a 345 to 60mph. Isnt the sprjnter differential also down to braking capability as well as weight?
Norwich to Cambridge has very long lengths of that, on fairly limited stops I doubt it'll make up for it. Awful lot of areas of 30 on the Sheringham line where the Sprinter speed is 55
The first cab end has been made up, showing slightly what the flirts will look like---->
https://www.railmagazine.com/news/network/the-face-of-ga-s-new-bi-mode-units-unveiled
Norwich-Cambridge is 75 max without differentials, 90 with & the Cromer/Sheringham line is 55/75 without/with SP speeds, it really depends as you say how quick the Flirts are from a stand. The electric ones on the continent are pretty nippy indeed.
Lakenheath to Ely is 45mph for non-Sprinter speeds. That's the reason the short hauled set is not permitted to operate this route. That really would hit the timings of the Stansted 755s.
What's the SP differential on that route?
SP speeds are basically 90 Spooner-Attleborough, 80 Eccles-Harling, 90 Harling-Thetford, 80/90 Thetford-Lakenheath, 75 Lakenheath-Ely North Jcn.
Thank you, but I was referring to your comment on the Stansted 755s being affected, won't these only be used on the Stansted Express normally? Therefore, I was meaning the differentials (presumably EMU?) on the line out to Stansted etc.
The Stansted Express units are class 745 I believe. The bimode units to be used on the Norwich-Stansted route will be 755/3 & 755/4 depending on whether 3 or 4 car sets.
Is that a new service then, Stansted-Norwich?
Extending the Norwich-Cambridge service through to the airport is a franchise commitment.
Wasn't aware of that, so the 755s will do that service and the 745s the Stansted Express.
Yes. All local trains will be 755s with 745/0 covering Norwich-London Intercity & 745/1 on the Stansted Express. The Norwich units are the only sets to offer 1st class & will also have a buffet.
I can understand going Standard only on local services but the Stansted Express does surprise me a bit.
From what I've heard the STEX doesn't have much take up for 1st so going all standard provides more seats for customers especially in peak times.
If there's no demand then it definitely makes sense, I was just under the impression that the demand was there, at least peak times.
1st class will be abolished on all of the West Anglia, Clacton, Southend & any of the old GE Routes.